DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Ive been logging my blm and setting now with my dfco off [i hope] and setting my ve tables.--- But i get the feeling my dfco isnt off, I was told to max out my dfco rpm min and max., and that should do it.---IF if it was off would you see a super lean condition when you let off gas ? [ wide ban reads top of screen] - IM using tuner pro and 7747 ecm.
__________________
Last edited by carls1982z; 06-20-2008 at 02:41 PM.
Reason: me goof
so if mine goes to max lean ,, when i let off gas then dfco is still not off when i let off gas. -- ive max out rpm min/max,, I wonder if maybe i have to do something with the map setting now ??
Last edited by carls1982z; 06-21-2008 at 11:10 AM.
I see on WB 14.7 on steady cruise and on foot off gas it goes rich as the sticktion of gas is pulled off the venturi/intake surfaces and enriches in log for a short while. Then I see that very lean spike. Now I run non DE(turned off/disabled) and I still see that result in log as fueling is now running off say 20 MAP at 3000 rpms fueling as an example .
yea, rbob, I POSTED late last summer on this and you told me what to do but i cant find thos you mention ??. --My tune is based off the ASDZ BIN and i use XDF FILE,,, 7747- MINE XDF ---Is there another xdf file i may need ???
Last edited by carls1982z; 06-23-2008 at 09:00 PM.
