jammin

i am having a h*ll of a time loading my syclone bin file onto my ostrich it says no xdf file and every time i ^ upload to emulator it says sucsesfull but when i verifi its a no go ?????? confussed

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

Six_Shooter

Are you loading an xdf file? I don't think I've ever seen an error that says "no xdf". I've seen a "Mismatched xdf and ads" error though.

Do you have "checksum disabled by upload"? If you do the verify WILL fail. Checksum does need to be disabled to to emulate, otherwise a prom error will pop up once a change or two is made.

AC

Make sure you grab the latest xdf file available on code59.org Check back after you confim thats the file you're using. I'm using the same setup, 730ecm, $59 bin, Tunerpro RT and an Ostrich 2. My car runs great.

__________________

1991 1LE 46K miles, 383 forged Eagle rotating assembly, Procharger P1SC, Dart Pro1 alum heads, 64cc/200cc,Harland Sharp 1.5 RR's, Comp Cam (Duration I:.520/E:.540 Lift I:236/E:248 113LSA), MSD 8336 Distributor, MSD 6+ Digital spark box, Holley HSR, 60# injectors, Hooker 2210's, Mufflex 4" catback,58mm BBK TB, Tremek TKO600, Spec Stage 3 clutch, Strange 12bolt w/3.73 gears, Spohn SFC,Spohn solid rear swaybar, Spohn LCA's, Spohn Adjustable TA, Denny's Nitrous Ready Driveshaft, $59 code, custom tune.
327rwhp / 485ft-lbs @5PSI boost. Both numbers having the timing 12 degrees retarded from where the timing needed to be. Re-dyno soon.

Six_Shooter

It sounds like he's using $58, by the "syclone bin" part. a $59 xdf won't work properly with a $58 bin.

jammin

ok got the thing to verifi quick question about aldl. do i need the 7730 aldl or the $58 aldl?????

Six_Shooter

$58 ALDL def. The ALDL data and scheduling is done in the chip (bin) not the ECM.