Im looling for a pocket programmer to be able to plug in and watch all the sensors anyone know where to buy or find one?

You may find what you need on ebay.

A pocket programmer won't let you see the sensors, only change the Eprom.

You need to read up on Aldl cables (OBD 1) to a laptop, to get sensor data.

As pointed out you're asking about the wrong item.

A Pocket Programmer programs EEPROMs.

What you want is an ALDL cable.

Several are available.

I use an ALDU1+CABL1 combo from www.moates.net, when I'm in a vehicle.

I use a home made serial (MAX232 based) ALDL cable on my test bench.

There are other's available through aldlcables.com, and a couple other places that I'm not recalling at the moment.

I would suggest getting an USB based cable, since many newer laptops don't have serial connectors, and if you ever need to borrow one or buy a new one, this will make the switchover easier, if you have a laptop that has a serial connection now. USB to serial adaptors are flaky at best. I have a couple adaptors that worked, but now I can't get them to connect, and nothing has changed.
I ran into a port compatability issue last year, not with the ALDL, since I already had the ALDU1, but I had to buy a new programmer since I was using a parallel based programmer, and the new laptop didn't have a parallel port.

so the pocket programmer will let me make changes to the computer?Or what will it allow you to make changes to and where would i find one of those? thanks

See here http://www.thirdgen.org/promintro
Please read