$32 to 6E for ZZ4ARAP(I've searched) L98 2cents Needed - Third Generation F-Body Message Boards

roguecoxnet · 04-10-2009, 04:08 AM

I've got an 87 350 TPI. 9.72-1 High CP Pistons, 2.02/1.60, zz4 Cam, 24 LB injectors and AFPR. I found a Bin file in the library its called ARAPZZ4 (Says No vats, Egr , for 24lb injectors,160 thermostat) for 87-89 F body which is exactly what I need. I've got a Autoprom, chips, adaptor and zif socket, tunerpro rt and I'm learning. I need to know how to mask that bin with the E6 xdf instead of the $32 (which is stock 87 MAF). Is it as simple as burning the ARAPZZ4 bin with the E6 xdf provided from tunerpro rt? Trust me I've searched and with 1000s of results I can't go through everything, checked the stickys too. please if I missed something don't get to pissed, I may have overlooked.

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

roguecoxnet · 04-10-2009, 02:30 PM

bump

convas · 04-11-2009, 08:54 AM

If all you want to do is burn the ARAPZZ4 bin without changing it then the XDF is not required, if you want to update the bin then you need to load the 6E XDF

Orr89RocZ · 04-11-2009, 09:13 AM

ARAP is 6E so you'll have to get the 6E xdf file, open that ARAPzz4 bin and then burn it to chip.

Then unplug your cold start injector and the car should now be just like a 6E system as i understand it

87 ecm is the same as the 89 which uses 6E