DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I haven't had a chance to get to the garage and test this out for the last couple of days so I have to ask.
Does the G1 need to have a memcal plugged into it for proper Emulation with the Autoprom???
I'm just starting out with my Autoprom and probably got ahead of myself when I was assembling the G1 into the ECM etc. So I pulled out my "Superchip" Memcal and just inserted the G1 without re-attaching it....
I was able to start and drive the car..... Emulate and Datalog but the car wouldn't pull over 3000 Rpm (I thought it was lower) then it felt like I hit a fuel cut/rev limiter...... the lack of the memcal is the only thing that I can think of.
What do you guys think????
__________________ 5.7Liter (357"+.040) 50,000kms/30,000mi, AirFlow Research Eliminator 180 Heads, Holley Stealth Ram, LPE 211/219 Cam, Comp Cams Pro Magnum 1.6 Roller Rockers, CAI, MAF screens removed, TPIS Airfoil, ADS Superchip, 24Lbs Accel Injectors, Kirban AFPR, MSD 6A Ignition Box and Blaster Coil, Moroso Ultra 40 wires, E3 DiamondFire plugs, A/C-Smog pump Delete with 1LE pulleys and Heaterbox, March 3 Piece Underdrive Pulleys, 160' Thermostat, Throttle Body Coolant Bypass, Hedman Elite Ceramic Coated Longtube Hedders pn68468, Custom Y-pipe with Flowmaster 3" Catback+80 Muffler, Trans-go Shift Kit. Corvette Servo
