Home Register FAQ Members List Calendar Photo Gallery Garage Search Today's Posts Mark Forums Read


Go Back   Third Generation F-Body Message Boards > Tech Boards > DIY PROM
Reload this Page need help havin trouble

DIY PROM Do It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools
Old 08-17-2009, 09:33 PM   #1
Junior Member
 
Join Date: Aug 2009
Location: e-town, CT baby
Posts: 19
Car: 89 camaro iroc z28
Engine: 305 tuned port injection
Transmission: t-5 speed
Axle/Gears: 2.73 posi drum rear

Classifieds Rating: (0)
need help havin trouble
my camaro will start and run fine when its cold, when the motor is warmed up and i shut it off it wont start. i checked the fuel rail and i got 42psi, checked spark and i have that. open up the throttle body and spray starting fluid, turn the key and let fuel pump run then start it with my foot on the gas and it starts. when its warmed up it idles kind of funny but then i give it gas and its good. i just bought an ecm, fuel pump, plug wires, ignition coil, fuel filter, changed oil & filter, i think the PROM might be bad but idk, i changed the ecm cause it got hot when i drove and the motor warmed up but it didnt come with the PROM. the 3 things for ignition are there but when its warmed up something is telling the fuel injectors not to fire right idk...... please help me solve this nightmare so i can still run the tpi

PS. the car sat for a while so thats y i changed the fuel filter/pump and oil/oil filter
This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!
89tpirocamaro is offline vBGarage Page   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 08-23-2009, 01:07 PM   #2
Senior Member
 
DSmith's Avatar
 
Join Date: Mar 2004
Location: Pearl Mississippi
Posts: 425
Car: 1989 Camaro
Engine: 383
Transmission: T5 WC
Axle/Gears: 3.73

Classifieds Rating: (0)
Re: need help havin trouble
Is the check engine light on while the engine is running? If yes, what code is it flashing.
__________________
1989 Camaro RS, 383 cid, Holley Stealth Ram, ,30# injectors,4" Custom MAF, Comp Cams 280 XFI roller, 1.6 roller rockers, T5 World Class, 3.73 gear.
For all you Air Purification needs, http://www.cleanairwater.net
DSmith is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > DIY PROM
Reload this Page need help havin trouble
« MPFI swap, no start and conection to PCM failed | vortec stealthram back to the drawing board »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 04:31 AM.

Contact Us - ThirdGen.Org - Advertising - Privacy Policy - Terms of Use - Jobs - Top

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
All content copyright © 1997 - 2009 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.