lst240z

Friend of mine bought the G1 adapter and Ostrich 2.0. Installed the tunerpro rt. His setup is E85 90 350 AT ecu 89 350 TPI z motor r400 auto trans Procharge psc1 42lb injectors dual inline pumps 2 bar map sensor mild cam forged standard c/r and bore pistons I dowloaded the anza.bin file from tunerpro's website. And the super_8dm.ecu file. I uploaded the anza.bin to the ecm. The car runs but obviously rich. I cannot get the aldl to connect for logging purposes. The emulator is working and I have messed with the ports and set the latency to 1 and still doesnt connect. It says could not initialize port. Am I using the wrong bin? It says that I have to have matching .xdf and .bin files maybe that I dont have the right one loaded to the ecm? I have been reading through all of these threads and cant seem to get a for sure setup. Im going crazy!

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

gta324

You have to have the correct *.ads file too....

2bar along with 8D code can be tricky to tune atleast until the 8D_boost.code is released.

8D code is prg for 1bar MAP 0-5V, when you use a 2bar the MAP values getting wrong since 2bar map also is 0-5V.

ex. stock 1bar MAP 50kpA in intake means 2.5v to ECM and code sees 50kPA
using 2bar MAP 50kPa in intake means 1.25v to ECM and code sees 25kPa.

__________________
GTA -89:415cui 749ECM+$59code+ p/h injectors+Procharger F1

Pro-Built "limited street"TH700 ACT 9.5" 2400rpm.......
http://medlem.spray.se/gta324 Updated 2007-02-07

Soundclip 2006
http://www.youtube.com/watch?v=WXI5r86p5es

Soundclip 2007 *new exhaust*
http://www.youtube.com/watch?v=GMWfjD-l280

ls1t240

1227730_8D.ads is the one that is loaded.