DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
im running OD with a 4l60E ive been having alot of transmission issues, i didnt know if anyone had a good datastream with things like linepressure and trans temp. thanks
Also if that isn't it, you could look at the ALDL zip file up on Moates with all the ALDL description of the datastreams in it. You just need to find the correct one and then you could make your own ADS file.
Ok after looking at the ALDL.Zip file it looks like it could be one of the following ALDL streams of a combination of streams. Sometimes there is one for just the Engine and one for the just the Trans. Or it takes putting 2 streams together and then using 2 different commands to dump the ALDL for either Engine or Trans. wish GM would have just said what MASK uses what stream. I always get confused just going off ECM and Engine type when we are talking about masks trying to figure out which one to use.
So it might be one of these or these 2 together (1 for engine and 1 for Trans)
DATA STREAM A201 ENGINE USAGE: PCM-6 4L60E L03 5.0L VIN = H 93 C,K,G L05 5.7L VIN = K 93 C,K,G L35 4.3L VIN = W 93 S,T,M,L LB4 4.3L VIN = Z 93 G,M,L,S,T,C,K
DATA STREAM A218 PCM-6 WITH 4L60E TRANSMISSION The 4L60E transmission can be used with the following engines TCM USAGE: L03 TBI 5.0L 94 VIN = H C,K,G L05 TBI 5.7L 94 VIN = K C,K,G L35 CPI 4.3L 94 VIN = W S,T,M,L LB4 TBI 4.3L 94 VIN = Z G,M,L,S,T,C,K LN2 MFI 2.2L 94 VIN=4 S * L03 TBI 5.0L 95 VIN=H C,K,G * L05 TBI 5.7L 95 VIN=K C,K,G * L35 CPI 4.3L 95 VIN=W S,T,M,L * LB4 TBI 4.3L 95 VIN=Z G,M,L,S,T,C,K * LN2 MFI 2.2L 94 VIN=4 S
Look at the ALDL def you have and see which one matches it and then see if you can find another mode 1 dump command in that defintion for the trans. It will probably have line pressure.
__________________ Paul Schwab
93 Black/Black Typhoon #424 www.code59.org - Code Tester and XDF Creator
