DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
The car in question is an 88' IROC 5.7L car. Mods are: Edelbrock shorties and ORY, !cat, GMMG cat back, free mods, 180* stat. I'm using a modded AJUL BIN. When the owner removes the Moates adapter and my BIN and reinstalls his stock chip - the surge is gone, but the fuel mileage and road manners go to crap. The car has 77K original miles, 2.77 gears, all the basic tune up crap has been replaced within the past 3K miles. One thing I want the owner to change is the 02, still has a single wire 02. I feel a 3 wire sensor would get rid of some of his issues.
Any thoughts? Input? I haven't had a chance to scan or data log. Is there anything I should be looking for in particular?
TIA
__________________ 2001 Camaro SS - M6 #4948 4XXRWHP/4XX RWTQ
1972 SS 454 Chevelle - F/S build in progress.
2000 Z28 A4 - 10.777 @ 124.94 MPH - 1.511 60' - 10 second street car. SOLD
1991 Z28 5.7L - Sold, and missed.
The car in question is an 88' IROC 5.7L car. Mods are: Edelbrock shorties and ORY, !cat, GMMG cat back, free mods, 180* stat. I'm using a modded AJUL BIN. When the owner removes the Moates adapter and my BIN and reinstalls his stock chip - the surge is gone, but the fuel mileage and road manners go to crap. The car has 77K original miles, 2.77 gears, all the basic tune up crap has been replaced within the past 3K miles. One thing I want the owner to change is the 02, still has a single wire 02. I feel a 3 wire sensor would get rid of some of his issues.
Any thoughts? Input? I haven't had a chance to scan or data log. Is there anything I should be looking for in particular?
TIA
I think I'd check and see if someone enabled hiway mode in your modified bin. if so, its either to lean or to much timing in the tables.
I think I'd check and see if someone enabled hiway mode in your modified bin. if so, its either to lean or to much timing in the tables.
I 100% agree. The custom tune most likely has too much timing either in highway mode, or the base map has too much timing which pushes the highway mode timing above what the engine wants. Also double check the base timing value in the .bin and make sure the base timing on the engine matches that.
