DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I recieved a new Actron CP9150 over the weekend and put it to the test. I have been having some driveability issues. I did all the normal test before I got the scanner and couldn't find anythign wrong. Car seems to lack power, hesitate off throttle if you go WOT and I thought it was running lean but who knows. I got some readings I was hoping you could help me with.
BLMS showed 124-130 at idle and I found out my Air/fuel ratio guage is more off than I thought
The CTS reading was 30* higher than the actual temperature outside and once the car warmed up it was 50* higher. Car running at 180* and CTS showing 230*
My TPS also had some odd readings. When I back probed it it was in spec with a smooth transition. The scanner shows .57 at idle and at WOT it will go no higher than 1.41.
What is ESC count for? I know what the ESC does but not sure what the reading is for.
So I am thinking I need a new CTS and TPS, what do you guys think?
Thanks in advance.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 2.77's suck.
Sponsored Links
Registered users do not see this ad. Click here to register for free!
