Tuning my rebuild
05-16-2010, 08:53 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: WI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Tuning my rebuild
Hey all, I'm finishing up installing my rebuilt engine. I had broken rings on number seven so out it came. I had the stock 350 short block made to a 355 with a 6" rod, forged flat tops, and a hot cam. I'm using the miniram and ported 113 heads with large valves.
I will be ready to start it soon so I need to take care of the tune. I've been practicing with TunerPro RT. Is this a good program to go with? I've edited the stock tune some, turning off things that have been stripped from the car. I have a laptop and was planning to order the ALDU1 and CABL1 from Moates plus the BURN2. Are those good choices?
Lastly, any good tips for tuning this engine combo? I'm new to this so if anyone wanted to share their tune for this type of combo to help me get started that would be cool.
I will be ready to start it soon so I need to take care of the tune. I've been practicing with TunerPro RT. Is this a good program to go with? I've edited the stock tune some, turning off things that have been stripped from the car. I have a laptop and was planning to order the ALDU1 and CABL1 from Moates plus the BURN2. Are those good choices?
Lastly, any good tips for tuning this engine combo? I'm new to this so if anyone wanted to share their tune for this type of combo to help me get started that would be cool.
05-16-2010, 03:19 PM
#2
Member
iTrader: (19)
Join Date: Apr 2005
Location: mass
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: 355 113 heads ported HSR hot cam
Transmission: th350
Axle/Gears: 7.5 342
Re: Tuning my rebuild
looks good i have the burn1 from moates.and the gp1.
http://www.moates.net/product_info.p...products_id=41
http://www.moates.net/product_info.p...products_id=41
Thread
Thread Starter
Forum
Replies
Last Post
83 Crossfire TA
Suspension and Chassis
6
09-18-2015 12:01 PM