ANYX bcc hard to find?
#1
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
ANYX bcc hard to find?
I've looked everywhere and searched 3go for the ANYX bin with no success. It apparently is very rare.
This bin is for a 1989 5.0 5 speed with the G92 optional 3:45 gear ratio.
I figured I could simply use APYS and change the gear ratio or VSS.
I can't see anywhere to change gear ratio or VSS in the bin using tunerpro and $6E extended.
Does anyone know how to change the ratio without using code? Thanks.
This bin is for a 1989 5.0 5 speed with the G92 optional 3:45 gear ratio.
I figured I could simply use APYS and change the gear ratio or VSS.
I can't see anywhere to change gear ratio or VSS in the bin using tunerpro and $6E extended.
Does anyone know how to change the ratio without using code? Thanks.
#3
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANYX bcc hard to find?
Thanks. The prom part number is 16133630 but I'm not looking to buy a Memcal and I realize there is no IP divisor.
All of the available bin files for the 1989 5.0 with 5 speed are for the 3:08 gear ratio.
The ANYX BCC is the only one for that car with a 3:45 gearing.
Because they are different and the only difference is the rear gear ratio in these bins, I was wondering if there was a way to change it in the basic code.
The question is, if it doesn't matter what the gearing is and can't be changed why would there be a different BCC for the G92 option and why would it be so rare that it is not listed in any of the bin libraries?
Probably not many G92 optioned cars sold but there should still be bins around I would think.
I would really like to compare these bin files to see the differences but I can't seem to locate one.
All of the available bin files for the 1989 5.0 with 5 speed are for the 3:08 gear ratio.
The ANYX BCC is the only one for that car with a 3:45 gearing.
Because they are different and the only difference is the rear gear ratio in these bins, I was wondering if there was a way to change it in the basic code.
The question is, if it doesn't matter what the gearing is and can't be changed why would there be a different BCC for the G92 option and why would it be so rare that it is not listed in any of the bin libraries?
Probably not many G92 optioned cars sold but there should still be bins around I would think.
I would really like to compare these bin files to see the differences but I can't seem to locate one.
Last edited by utilityguy2; 05-30-2012 at 09:35 AM.
#4
Junior Member
Join Date: Feb 2009
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Engine: LO5 350 (TBI 220)
Transmission: 200R4
Axle/Gears: 2.73
Re: ANYX bcc hard to find?
A few people here claim to have one:
https://www.thirdgen.org/forums/diy-...ual-89-6e.html
https://www.thirdgen.org/forums/diy-...-anyx-bin.html
etc. You might try contacting them.
https://www.thirdgen.org/forums/diy-...ual-89-6e.html
https://www.thirdgen.org/forums/diy-...-anyx-bin.html
etc. You might try contacting them.
#5
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANYX bcc hard to find?
A few people here claim to have one:
https://www.thirdgen.org/forums/diy-...ual-89-6e.html
https://www.thirdgen.org/forums/diy-...-anyx-bin.html
etc. You might try contacting them.
https://www.thirdgen.org/forums/diy-...ual-89-6e.html
https://www.thirdgen.org/forums/diy-...-anyx-bin.html
etc. You might try contacting them.
#6
Junior Member
Join Date: Feb 2009
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Engine: LO5 350 (TBI 220)
Transmission: 200R4
Axle/Gears: 2.73
Re: ANYX bcc hard to find?
I was thinking more along the lines of PMing the guys who said they had it, but they may or may not be around anymore.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
lt1z350
Engine/Drivetrain/Suspension Parts for Sale
3
09-29-2015 01:50 PM
mcquigg
Engine/Drivetrain/Suspension Parts for Sale
0
08-13-2015 02:26 PM