$6E failed emissions with 128 BLM?
#1
$6E failed emissions with 128 BLM?
I failed Oregon emission testing with over 600 HC's. I used Data Master TTS to adjust the idle BLM's to a near perfect 128 BLM. The remaining VE Table was 128 + /- 3. I needed to increase a couple cells in the MAF #1 Table by 1.00 ~ 1.22 Grams per Second to get the BLM from 150 or so down to 128.
Any tips, suggestions, or comments are welcomed!
dave w
Any tips, suggestions, or comments are welcomed!
dave w
#2
Supreme Member
iTrader: (2)
Join Date: Jan 2005
Location: Hurst, Texas
Posts: 9,981
Received 384 Likes
on
328 Posts
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Re: $6E failed emissions with 128 BLM?
I failed Oregon emission testing with over 600 HC's. I used Data Master TTS to adjust the idle BLM's to a near perfect 128 BLM. The remaining VE Table was 128 + /- 3. I needed to increase a couple cells in the MAF #1 Table by 1.00 ~ 1.22 Grams per Second to get the BLM from 150 or so down to 128.
Any tips, suggestions, or comments are welcomed!
dave w
Any tips, suggestions, or comments are welcomed!
dave w
#3
Thread
Thread Starter
Forum
Replies
Last Post