DIY PROMDo It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I will post my data logs when I get home tomorrow. But what causes my BLM's to be split so much? My Right BLM is about 140 and my Left BLM is about 120. It fluctuates quite a bit and its always about 20 counts off from each side. Any ideals?
__________________ 93 Z28 w/ ZR28Kit & Fx-5 Suspension, 17" SS rims, LS1 brakes w/braided lines, 1LE Swaybars, slotted rotors, Self-tuned Chip, TransGo, pullies, CC 1.6 non-aligning 7/16 rockers,ported heads, Mezeire waterpump,SLP headers w/2100* PBM coating, 24#SVO injectors, Metco afpr w/fuel rail gage,OverMade4You wire looms & custom wires ,LT4 Valve cover,etc....To many to list
Check out my homepage at: My Website
***NEED TO INSTALL***
HOTCAM
More fuel to one bank as opposed to the other. This can be looked at as either one bank running lean or one bank running rich or BOTH. This could be the result of several different things ... i.e. Fuel Injector problems, Tuning, wacky O2 sensor, etc.
Tim
__________________ 2005 Subaru STi, Got RlCE?
My old 11 second 1990 IROC-Z (sold to TGO Member 92 Formula)
Im thinking it might be my O2 sensor. I had to extend one of them on my SLP ypipe because the stock one was too short. I used regular speaker wire to extend the O2. Do you think this will cause the problem?
__________________ 93 Z28 w/ ZR28Kit & Fx-5 Suspension, 17" SS rims, LS1 brakes w/braided lines, 1LE Swaybars, slotted rotors, Self-tuned Chip, TransGo, pullies, CC 1.6 non-aligning 7/16 rockers,ported heads, Mezeire waterpump,SLP headers w/2100* PBM coating, 24#SVO injectors, Metco afpr w/fuel rail gage,OverMade4You wire looms & custom wires ,LT4 Valve cover,etc....To many to list
Check out my homepage at: My Website
***NEED TO INSTALL***
HOTCAM
[quote]Originally posted by Wilson
[b]Im thinking it might be my O2 sensor. I had to extend one of them on my SLP ypipe because the stock one was too short. I used regular speaker wire to extend the O2. Do you think this will cause the problem?
