Electric hatch release don't work
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Tallahassee, FL
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 V6 Camaro
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42 open diff
Electric hatch release don't work
I just put in a new latch assembly with a pull down motor. I got the pull down motor to pull the hatch down but it was set too low so I popped the hatch open with the key and moved the latch up but now the motor pulled the latch to far down so I can't lock the hatch. I figured that the hatch release switch up front would push the motor back up but won't. How do I get the motor to come back up so I can secure the hatch?
And yes all the grounds, connections, and fuses are good.
And yes all the grounds, connections, and fuses are good.
Last edited by 2.8RS; 08-04-2008 at 07:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
10
08-11-2015 10:11 PM