ElectronicsNeed help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
OK...I have a list of names of people who already expressed interest & theirs will be shipped first. Basically, their orders will be "bumped to the front of the line" for shipping.
But, I'm not expecting any problem running out. All orders will be filled regardless, don't worry about nobody getting theirs. I can promise you.
These will fit ANY car. Not just 3rd gens. They are built as Universal units. As long as you have 2 or 3 bulbs per side, they'll work. Like Impala SS, Caprice,....Even Mustangs. They'll work.
Shipping in the lower 48 states is included....$56 and I take Paypal at:
No credit card funded Paypal payments please.
UNIVERSAL.....They'll fit ANY car, with 2 or3 bulbs per side. For Camaros, you'll wanna do the amber to red lens conversion & run all red tail lights, which is 100% legal to do, in all states.
how much, do they come as a kit,are they hard to install ,how do i pay you , do i half to cut the factory tail light. what is the waiting period. i think thats it
how much, do they come as a kit,are they hard to install ,how do i pay you , do i half to cut the factory tail light. what is the waiting period. i think thats it
Please read my first post....Parts of that are in there.
Yes, wire cutting & splicing is needed. Chassis wires to the STS unit, then the lights are hooked up to the STS. It converts the 1 signal into 3 flashes, in sequence.
As Stephen said, his first post explains it all, including payment.
As for the installation, the units come with detailed instructions on which wire to cut, which wire to splice into etc. If you are capable of splicing wires, this would be no problem to install. I've done a few units myself already.
On a Camaro, though (as Stephen pointed out), you'd have to modify the tail lights a little (amber to red etc) and also make a slight wiring modification under the steering column.
If you feel like this should be easy for you, then we'd LOVE to see STS on a Camaro!
Lou
__________________ '91 Z28 convertible w/305TPI WC T5 (no more auto)
"Nothing screams more of poor craftsmanship than wrinkles in your duct tape!"
Hey Stephen, gonna order mine before I go to bed - sending pay pal. Like I said wife will kill me if her car doesn't get this set up like mine. I am spreading the word trying to sell more for you through other people. I keep telling them ALL MAKES and MODELS.
Paypal sent - cant' wait to receive! Merry Christmas TGO
__________________ L8TER,
Mikey
Check out my vBGarage for Details of BOTH cars!!!!!
Last edited by theimpaler68; 11-21-2008 at 10:29 PM.
Thanks....I keep wanting to get a 110AC to 12DC converter & mount a spare set of my GTA lights up, on my wall inside the house. Run the hazards 24/7 & see how long it takes until a STS unit dies.
Thanks....I keep wanting to get a 110AC to 12DC converter & mount a spare set of my GTA lights up, on my wall inside the house. Run the hazards 24/7 & see how long it takes until a STS unit dies.
my wife said thanks for the idea... i also have a spare set of taillights. she is thinking hhmmmmm wouldnt that be nice. lol
__________________ L8TER,
Mikey
Check out my vBGarage for Details of BOTH cars!!!!!
these are extremely easy to hook up. bought my first one during round 2. bought another t/a earlier this year so just bought my second. i just hope that by the time my collection grow again stephen and lou are still making these. someone with a camaro please get one and post video of it. still want to see one on a maro!
hcr13 and i both did our vids from round 2. both on t/a's though. after i get the next box i will make a new vid with both of my cars flashing side by side!
__________________ L8TER,
Mikey
Check out my vBGarage for Details of BOTH cars!!!!!
I got some guy riding around on the outside of a helicopter. I looked lower down on the page and found the videos for the sequential flasher. Thanks it is good to see what I'm getting though I won't be installing it until the spring of 2009. Is there some way to change the speed that turn signals are flashing?
hey guys just got mine in the mail last week first chance to say thanks again to stephen and lou for another great job. after i get 2 more dual filament sockets i'll get my video up of the 86 and the 88 flashing side by side.
__________________ L8TER,
Mikey
Check out my vBGarage for Details of BOTH cars!!!!!
hey guys just got mine in the mail last week first chance to say thanks again to stephen and lou for another great job. after i get 2 more dual filament sockets i'll get my video up of the 86 and the 88 flashing side by side.
Well I go mine on Nov 29th Saturday. Mine looks different then the one in the picture or maybe I just think mine is different. Since the picture is from the top of the green connectors. Anyway it looks great and I won't get it installed until the spring of 2009. One question when I press on the brake pedal my brake lights are going to flash. Like if I turned on the 4 way flashers? Well there is a way to fix this by hooking it up to the front turn signal wires, that I read in the instructions. It's all good though. I always like the sequential turn signals on those older Ford T-Birds. Made those T-Birds unique. Just like my GTA will be. Looking at the other picture, I see it is exactly the same. My bad. Are there anymore pictures of STS being installed or more pictures of what it looks like in the car? Just wondering how people had there's hooked up inside there car?
Last edited by Steveh4263; 12-01-2008 at 06:36 PM.
Well I go mine on Nov 29th Saturday. Mine looks different then the one in the picture or maybe I just think mine is different. Since the picture is from the top of the green connectors. Anyway it looks great and I won't get it installed until the spring of 2009. One question when I press on the brake pedal my brake lights are going to flash. Like if I turned on the 4 way flashers? Well there is a way to fix this by hooking it up to the front turn signal wires, that I read in the instructions. It's all good though. I always like the sequential turn signals on those older Ford T-Birds. Made those T-Birds unique. Just like my GTA will be.
Yours is exactly the same. Only different ones are the first 3, which had black connectors instead of green.
And no.....The Hazards will, but your Brakes will not continuously flash. They will light in sequence just like a a turn signal, but all 3 will stay lit until the pedal is released.
Stephen, just curious as to what shipping method that you use. Do you ship through the mail or do you use something like UPS?
theimpaler68, where do you get the dual filamet sockts from? I have an 89 formula that I am putting in the gta tail lights on the car and I believe that I need to put in the extra dual filamet socket as well. If you could help me with this I would greatly appreciate it.
Stephen, just curious as to what shipping method that you use. Do you ship through the mail or do you use something like UPS?
theimpaler68, where do you get the dual filamet sockts from? I have an 89 formula that I am putting in the gta tail lights on the car and I believe that I need to put in the extra dual filamet socket as well. If you could help me with this I would greatly appreciate it.
I ship via USPS & have never had a problem with any yet.
As for the sockets.....You didn't think I wouldn't have this covered in the instructions?
Dorman #85867 Pep Boys always seemed to have some. Autozone was the worst I've seen about having them. Or Rockauto.com has them as well. Pretty much any parts supplier has or can get them, if they carry Dorman..
Are there anymore pictures of STS being installed or more pictures of what it looks like in the car? Just wondering how people had there's hooked up inside there car?
Those are the only in-process install pics I have, That is FYRCHKENs car as it was being installed in his car.
And mine is the total prototype devolpment unit & about twice as big as the STS units. So no pics of it either.
Run the hazards 24/7 & see how long it takes until a STS unit dies. 
Is there some way to change the speed that turn signals are flashing? 
1987 Pontiac Trans AM GTA 
