Hey guys, I'm an FNG to this site, I have a 95 camaro, jade green (hince the name,) Both of the plastic brackets for the horn under the air bag have broken, I decided to wire a button on the dash so that i can get her inspection done, short of dismanteling the steering wheel. how do I go about doing this?

I would buy new horn buttons from the dealer and install them myself.

But if you’re on a budget you can do it the hard way.

Gain access to the “Convenience Center” inside the knee bolster.

You will find it convenient if you are 2 feet tall.

Connect a wire to ‘J’ on the horn relay.

Connect the other side of the wire to the push button you have provided.

Connect the other side of your push button to ground.

There is a small gauge black wire that runs into the clock spring and will probably be ran with the airbag wires so you have to be careful that you get the right wire. Connecting that wire to ground will activate the horn relay, thus activating the horn.


BTW, this site is actually for 82-92 F-Bodies, you would find better information and get better results to your questions if you searched on a forum designed for your vehicle.

Thanks for the answer NINA, I appreciate the help.


sorry Jeff91rs I didn't know I was in the wrong forum do you have as link to the right one? I had a buttron hooked up before from inside the air bag, I know what I'm doing there, It was finding the right relay.