ElectronicsNeed help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
did you check the connections at the coil and pressure sender? the oil pressure guage is probably just the sender, as for the tach it could be a multitude of things
The RPM gauge doesnt work at all and the oil pressure gauge moves around when it wants too.. Whats up? Everything else works fine
Check your wire that goes to the distributer to see if it fixes your tach. also check the sending unit for your oil pressure gauge. Mine was bouncing all over the place at one time. I finally replace the gauge AND the sending unit. Works like a champ now. Oil pressure sending unit is around 10-15 dollars. The gauges do go bad after a while. or they may never go bad. I have a 85mph cluster as well as a 110mph cluster ill sell you for 30 bucks plus shipping.
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
BTW.. The RPM gauge is pegged all the way to the right.. Any different answers now?
ya change the gauge is that different enough for ya?
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
ya change the gauge is that different enough for ya?
i have the same problem. my tach just pegs 7k. ive changed entire clusters. still nothing. from what i understand these tachs get inaccurate all the time. i suggest trying another tach and going from there.
