ElectronicsNeed help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 1983 camaro 5 spd in which I just installed electronic cruise from an 84 into. I just need to make sure I have everything to make it work. Car doesnt run yet.
I have:
An instrument panel with the yellow vss box in the back of it.
Cruise control harness from the 84 5 spd
Brake relief switch
Computer for the cruise located on pass side behind the dash
Servo unit
Vacuum "ball"
port that goes on top of the intake manifold
Only things I think I am missing are:
Cruise switch for the clutch, is it the same as the brake switch? I have 2 of those. I also have a switch which doesnt have a vacuum nipple on the back. Harness has a connector which I suspect is for the clutch because brake is already in.
VSS for the transmission, the original car never had cruise, just a t5. Do I need to install a VSS for the transmission or are they already built in? Its a cable type speedo.
Thx
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
