anyone know how to make a 12v jumper - Third Generation F-Body Message Boards

dirtyd6669 · 11-04-2009, 03:37 PM

does anyone know how to make a 12v fused jumper and if so can you tell me how to make one so i can figure out why i am getting this code

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

TPl383 · 11-04-2009, 05:39 PM

got extra wire layin around? if you cant figure out how to take some wire and use an inline fuel to make a jumper.

Maybe you shouldn't be putting 12v to what ever your gonna try and do.

Sorry to come off as an *** but without more info and more knowledge on your part you might do more harn then good if your not sure of what your doing.

(easiest way is a test light)

dirtyd6669 · 11-04-2009, 09:07 PM

u dont seem like an ***. i was going over how to check my codes and for code 33 it say to hook up a jumper to it to see if its getting power.

TPl383 · 11-04-2009, 09:30 PM

well you dont want to hook up 12v to it then.
You want to see if its getting power to the maf./map

get yourself a good multimeter to check voltages. it will tell you how much power etc.
A test light will work and just tell you if your getting power. any autoparts store should have both items.

dirtyd6669 · 11-04-2009, 09:32 PM

okay thank you

dirtyd6669 · 11-17-2009, 10:48 PM

okay the reason that i need a 12v jumper is to hook up to my adla as the service manual says to make it easier to find the bad wire i should have causing a me to have a code so if any one could tell me how to make one that would be appreciated