need to wire in leds..... - Third Generation F-Body Message Boards

PATS88IROCZ · 11-10-2009, 01:04 PM

ok, so I got this kit so I wouldn't have to spend $600+ because I wanted blue lit gauges. Its a "wire in" kit but it has a battery pack but the switch is not a stick type switch (you have to hold it for it to work...." the wireing to the switch is cheap. Plus I want it to be legit and not rigged looking...Its a 12 volt 6amp I think and I plan on adding another set and I was wondering wheir I could wire this stuff in and if I could wire the 2 sets to the same place wheir the would be spliced in if that makes since....I do plan on putting a toggle switch in.

-their allready mounted and look mad ****en sic!!!! Best $20 bucks spend in the A Z ***** asile!

-thanks guys!

PATS88IROCZ · 11-11-2009, 01:11 PM

anybody

89RS_82Z · 11-11-2009, 01:21 PM

the switch and the small wire, and the batt are all for display reasons so you can see how they work without hooking them up, just hook the red to a 12v source or switch and the black to a ground and they will work, trash can the battery and micro switch or save them for some use down the road

PATS88IROCZ · 11-11-2009, 01:26 PM

lol, you sound just like the box they came in. Im asking like wheir can I wire them in that will work and not screw anything up. Mabye sig lighter? Im still looking for a switch that I like and that will work with what im trying to do.

89RS_82Z · 11-11-2009, 05:57 PM

LOL i was a little puzzeled at first on why you asked that

anyway i would hook it into the 12v feed for the illumination on the radio, so they will come one with your parking/head lights

if you need help to figure out what wire that is post back up, and i will look it up and tell ya

Pierced_Zombie · 11-11-2009, 06:02 PM

lol i was thinking about doing somthing simillar but was wondering if you can just change the original bulbs w/ led bulbs(like wire the led bulbs in were the original ones were)

PATS88IROCZ · 11-12-2009, 01:06 PM

Quote:

Originally Posted by 89RS_82Z

LOL i was a little puzzeled at first on why you asked that

anyway i would hook it into the 12v feed for the illumination on the radio, so they will come one with your parking/head lights

if you need help to figure out what wire that is post back up, and i will look it up and tell ya

yea, lmk. Also I dont have a radio any more.....but the wires are all their....I post of pic of the leds when I get a camer, the speedo side needs to be adjusted tough...

PATS88IROCZ · 11-15-2009, 01:45 PM

Got the L E Ds wired in their super bright and got my fogs wired in too, ill post some new pics up.