11-12-2009, 08:30 AM
|
#1 |
| Junior Member
Join Date: Aug 2009 Location: Iowa
Posts: 22
Car: 84 Z28 Engine: 454 Transmission: LT1 T56 Axle/Gears: Moser 12 Bolt Posi with 3.73 gears | Wiring on fuse panel
Ok so I sucessfully removed the ECM without cutting any wires! Now I started to removed the harness that plugged into the ECM from under the dash and removed all the wires and noticed that a dark blue wire ran into the flasher for the turn signals with a purple one going to the ignition switch.
Since this blue wire was located on the ECM Ignition fuse 10A and the pink/black wire that was also part of the circuit was removed do I need to splice a different pink wire into that location so that my ignition switch works or will it be fine? | | | |
 
|  |
