need help with wiring new dash
#1
need help with wiring new dash
So i ordered a DIGITAL gauge cluster for my car but now everytime i turn the key a alarm noise comes on and doesnt go away anybody else encountered this promblem
#2
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Dash 4 Cash
If the alarm (Audio Alarm Assembly aka Buzzer) never before came on therefore you can get by without it, you can disconnect it.
Gain access to the Audio Alarm Assembly.
To gain access to the Audio Alarm Assembly remove the knee bolster.
You’ll find the Audio Alarm Assembly in the ‘Convenience Center’, which is to the right of the steering column.
OR
If you want to retain and fix it; one at a time disconnect pins B, D, E, G, at the assembly.
When the tone stops you have found the problem circuit.
Then you can post and reveal which letter stopped the alarm for a repair procedure.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
After The Fourth Barrel Roll I Lost Control Of The Car
Gain access to the Audio Alarm Assembly.
To gain access to the Audio Alarm Assembly remove the knee bolster.
You’ll find the Audio Alarm Assembly in the ‘Convenience Center’, which is to the right of the steering column.
OR
If you want to retain and fix it; one at a time disconnect pins B, D, E, G, at the assembly.
When the tone stops you have found the problem circuit.
Then you can post and reveal which letter stopped the alarm for a repair procedure.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
After The Fourth Barrel Roll I Lost Control Of The Car
Thread
Thread Starter
Forum
Replies
Last Post