You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Set of 305 H.O. sbc heads. 1.85 int and 1.5 exh. valves. Great replacement for those crappy swirl port heads. I've researched on these heads on this site and they say these heads with a mild porting and 1.94 int. valves, can flow just as good as L98 and vortec heads, if not better. Can work on a 350 sbc and will raise the compression with the lower cc heads. $100+shipping. SOLDSOLD
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 388 sbc,400 cast-steel crank, forged pistons 0.060 over, 11 to 1 forged flat top pistons, Isky custom 251@.50 259@50 108 LSA mechanical flat tappet. .544 int - .547 exh lift, 1.6 Aluminum rr, Brodix track 1 heads, Victor Super intake with Holley Race 830 cfm carb, NOS, Pertonix HEI Race Dizzy, Weiand Aluminum water pump, Holley black electric fuel pump w/regulator, Turbo 350 trans w/3500 stall, 9 Bolt 4.10 rear disc, Comp Cams SFC, Eibach Drag Launch rear coil springs w/passengers side airbag, 90/10 struts, Weight 3400lbs. with me and half tank of gas, 1 3/4" Doug's LT headers, 3" complete dual exhaust, Stock Torque Arm w/ poly mounts to the trans, Lakewood LCAs, 27x10.5x16 M/T ET Streets
Last edited by mcbchild; 07-23-2006 at 11:34 PM.
Sponsored Links
Registered users do not see this ad. Click here to register for free!
DO you still have these? Are these better than the ones that came on the 1992 camaro rs w/ the 305 tbi? Thanks Dave
----------
DO you still have these? Are these better than the ones that came on the 1992 camaro rs w/ the 305 tbi? Thanks Dave
Last edited by adm030; 05-03-2006 at 10:09 AM.
Reason: Automerged Doublepost
DO you still have these? Are these better than the ones that came on the 1992 camaro rs w/ the 305 tbi? Thanks Dave
yes, I still have these heads and yes they are better than the 92 305 TBI heads. Your heads have the swirl port which I have been told are garbage and the 416 heads will wake up your motor and with a mild port job and 1.94 intake valves, they'll be breath just as good as the L98 and vortec heads. I used them to replace my heads on an 88 ta 305 tbi. They made a big difference. I don't need them any more since I went with a 400 sbc in the ta. Also, I have a great cam for the heads, but it is a hydraulic cam. I had replaced the roller cam and lifters in place of a better performance cam with a holley 4 bbl carb.
Hey where in IL do you live. Im in the NW suburbs and am looking for these heads but dont want to pay that much since they are stock. $60 picked up if you live close?
__________________ Check out my Garage! 1990 Camaro RS
Appearance: 4 inch cowl, 91-92 aero GFX and Z28 spoiler, blackouts, shaved antenna and locks, 91 Z28 rims
Interior: Reupholstered from gray interior to black, A-pillar gauge pod, K40 radar det., 2000 T/A black leather seats, Custom door panels, Grant steering wheel, RAAM matted
Drivetrain/Suspension: 350 ready for boost, custom blower cam, Vortec heads, Super Victor intake, 650 double pumper, HEI dizzy, ARP bolts, Mallory Comp fuel pump, Hedman long tubes, Summit X-pipe, Bullet mufflers, 2800 stall, Corvette servo, TV corrector spring, RCI fuel cell, Spohn Wonderbar
