I have a brand new ZZZ cam for sale. The motor was never fired. Sold the heads off this motor a while back, and the pictures say it all. This cam was removed and sold because I originally thought it was the zz3/zz4 camshaft. Turns out it is a 235/235 single pattern hydraulic roller cam. I used the motor for my build, and have no use for this cam. Looking for a reasonable offer on this piece. I also have the matching ZZZ intake manifold from the crate motor, which is a gm replica (winter's casting) of the 1970 LT-1 intake manifold.
Here are the specs and some info on the cam
ZZZ Hydraulic Roller Tappet P/N 10134334
This hydraulic roller tappet is used on the 5.7-liter H.O. engine assembly for ZZZ through ZZ2 engines. Use with spring P/N 10134358. The duration at lash point in degrees (intake/exhaust) is 336/336; duration at .050” tappet lift (intake/exhaust) is 235/235; and maximum lift with 1.5:1 rocker ratio (intake/exhaust) is 480/480. Valve lash is zero/zero and lobe centerline is 114 degrees.
If anyone is interested, please let me know. Thanks
Will
__________________
89 IROC-Z As seen on TechTV August 2003
*Bone Stock* Dyno 214 rwhp / 312rwtq
14.3@97mph Bone stock pass
ZZ?/AFR180's/XFI268HR13 awaiting trial runs
