Alston subframe, lakewood shocks, radiator, stealth intake,and a bunch of other parts - Engine/Drivetrain Parts for Sale - Third Generation F-Body Message Boards

scorchmaster · 05-23-2008, 12:01 PM

Alston subframe connectors, never welded, comes with bolts and nuts. $120 + shipping

Lakewood 50/50 shocks, only a few hundred miles on them. $50 + shipping

Hurst 5 foot long shifter cable, BRAND NEW. $30 + shipping

Stock replacement radiator, used for 20 miles, in next to mint shape. There are 4 fins bent to get my fan installed, that is the only thing wrong with this. Comes with a lifetime warranty from autozone. $50+shipping

Weiand Stealth intake manifold, painted a burgundy color, has one bolt hole in the thermostat stripped, needs to be fixed. $25+shipping

Summit vacuum canister with gauge, fittings and bracket. $20 + shipping

1" aluminum 4150 carb spacer. $10 + shipping

30% reduction crank pulley, short water pump, made from aluminum. $15+shipping

Straight bolt pattern starter, used for 2000 miles, still works great just had it tested. $20+shipping

Bowtie front grille, red in color with a license plate holder which can be taken off. $15+shipping

Rear brake line, (The one connecting the one rear line to the two on the axle) this is next to brand new. $15+shipping

Mark Williams chromoly driveshaft center piece, does not have the end yokes, just the middle chromoly piece. $20+shipping

TADailyDriver · 05-23-2008, 12:07 PM

interested in the pulleys, send pics to my pm please. Will these fit a 305?

scorchmaster · 05-23-2008, 12:23 PM

The brownish spot on the middle is just the reflection off my hand

----------
yes it will fit a 305

6SIX6 · 05-23-2008, 01:24 PM

Interested in the carb spacer and the bowtie front grill. Could I get some picks and will you ship to canada. Thanks

TADailyDriver · 05-23-2008, 01:52 PM

do you have any pictures of the short water pump pulley as well? consider them sold ill transfer money into my paypal account if thats what you take but it will take a few days. Also is that intake setup up for electric or mechanical gauge unit senders?

scorchmaster · 05-23-2008, 02:02 PM

The intake thing you're looking at is a plug, but it did have an electrical sending unit in it at one time.

I only have the short crank pulley, I was just stating it was made for a short water pump, sorry for the confusion.

TADailyDriver · 05-23-2008, 02:06 PM

Quote:

Originally Posted by scorchmaster

The intake thing you're looking at is a plug, but it did have an electrical sending unit in it at one time.

I only have the short crank pulley, I was just stating it was made for a short water pump, sorry for the confusion.

can i use this crank pulley on a basic 305 w/ a stock water pump or would i have to change out the water pump? I may be interested in the inatke as well but i will need to have to think about it.

scorchmaster · 05-23-2008, 02:32 PM

if the stock water pump is short style, then no you dont have to change it out.

TADailyDriver · 05-23-2008, 06:49 PM

Quote:

Originally Posted by scorchmaster

if the stock water pump is short style, then no you dont have to change it out.

Ok ill have to ask around and see what the difference is. ill you know in a day or so

karl's-92'-z28 · 05-23-2008, 10:36 PM

Could you post pics of grill please

Drac0nic · 05-23-2008, 11:08 PM

Is the intake for 87+ pattern or 86 and earlier?

Stephen · 05-23-2008, 11:13 PM

Shipping on the SFCs to 78605 please?

scorchmaster · 05-24-2008, 02:53 AM

subframes are sold, intake is for pre 86, grille pics will be posted tomorrow

6SIX6 · 05-24-2008, 02:55 AM

So will you ship to canada???? as I said before im interested in the grille and spacer. Thanks

scorchmaster · 05-24-2008, 04:03 AM

sorry, yeah I'll ship to canada

scorchmaster · 05-25-2008, 12:32 PM

my camera wont connect to my computer anymore, it keeps crashing. I'll try again to get you those pics.

all4u · 05-25-2008, 01:19 PM

post pics of vacuum canister with gauge and maybe I can come today or tomorrow to get it. I am in Des Plaines so I can drive to you.

CARMOND · 05-25-2008, 03:22 PM

Could you send me your phone #.I would like to get the shocks & the vacuum canister

scorchmaster · 05-27-2008, 03:28 PM

stage20 · 05-27-2008, 09:14 PM

pic of the driveshaft, and length, please.

3rdgenmaro · 05-28-2008, 12:37 PM

do you still have the vac canister and manifold spacer? If so how much to ship to 24330? Thanks

scorchmaster · 05-28-2008, 12:57 PM

spacer is pending right now, not sure on the canister as no one has responded back to me. But shipping on the canister to you will be about $15

scorchmaster · 06-01-2008, 12:37 PM

spacer. subframes and radiator is gone

Roadkid91 · 06-03-2008, 04:29 PM

Is the driveshaft stock length? will it work with my 700R4 and Borg Warner 9 bolt?

scorchmaster · 06-03-2008, 05:15 PM

I'll measure it and let you know.

mcbchild · 06-06-2008, 11:26 AM

rear 50/50 shocks still avail.?

all4u · 06-06-2008, 11:35 AM

Is the vacuum canister still available? If so, let me know and I will come by on monday and pick it up from you. I am down the street in Des Plaines.

scorchmaster · 06-06-2008, 11:40 AM

The driveshaft center will be good for any other car besides a thirdgen, it's kind of short about 38-39". Maybe or maybe a thirdgen with a t56 with a S60 rear end

50/50 shocks are available.

All4u: I tried calling you about it a while back but I never got a hold of you. I still have it and your nitrous brackets you didnt pick up

scorchmaster · 06-15-2008, 07:14 PM

back up top