1987CamaroZ28

Front stock springs - $50 + shipping

Driveshaft - good condition but I'm going with a Denny's. $50 + shipping

Runners, Plenum, TB, injectors, intake base all for $150 + shipping (TB and injector not shown in pics)

'87 305 Heads- many hours invested in extensive porting on polishing. The heads are bare, but came out really nice. These are the good heads, part # 14101081. $150 (for both) + shipping. The valve job hasn't been done yet. I have all the valve train parts if wanted. Engine had 73k.

'87 305 TPI short block, but has the cam, roller lifters, pushrods, timing gear/chain. It's a long block really, without the heads. only 73k, well maintained. $200 picked up. I will deliver if within 50 miles for $225

I live in CT

__________________
1987 Z28 Iroc-Z; a/c delete, removed heater core to clean up engine comp, k member, control arms, Hotchkiss Front/rear sways, front coil over koni kit, Spohn reinforced strut plate, stainless brake lines, Spohn torque arm, wilwood front brake set, metco LCAs, panhard rod, definned MAF, AFPR, MSD 6al, TES 1 5/8, Random Tech cat, flowmaster, gutted air filter housings, T/A alum rear girdle cover, and a bunch of other stuff i can't remember.

1987CamaroZ28

geez, all my pics are 2.2 megs. I need to reduce the file size and post the pics

LoudmouthSS

whats shipping on the heads to 11705

1987CamaroZ28

i put some of the pics on craigslist:

https://post.craigslist.org/manage/772663263/zwzju/

1987CamaroZ28

I'm getting a cost of UPS ground $44.29 and 3 day delivery is double. What's the best way to reduce a pic size, so i can post them up here. I see there's a 1 meg cap.

19formula30589

Do you have parts or the fuel rail, i really need the housing for the FPR

1987CamaroZ28

Thanks for your inquiry. I actually need the fuel rail assembly (including the FPR housing), that is being retained for the next engine.

Thanks again.