You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
So I have some extra stuff left over from my LSx swap.
BBS Designs single turbo header. I had Edgardo modify the typical design because I had my alternator mounted down low on the passanger side so the wastegate actually comes off the back of the header upwards towards where the downpipe would be run. I'm fairly certain it wouldn't work with A/C, it looks like the wastegate flange is right where the edge of the A/C box would be. Never been used, just mounted up for mocking purposes. $500 shipped.
HSR and all associated crap. I had a '91 305 with this on it. Almost every sensor is new, dizzy is new, cap/rotor/ignition module is new, NGK plugs are new, Taylor custom cut wires are brand new (black), O/P sensor, IAC, TPS are all new. Comes with Kirban Billet Adjustable FPR with only a thousand miles or so on it. Motor has ~140k on it. LT1 cam but otherwise never been cracked open. Replaced valve cover gaskets, oil pan gasket, and front seal. I have the beveled washers to mount the original HSR to later style heads. Hooker Long tube headers, with one of the driver side primaries dented to clear the A-arm mount. One o2 bung welded into each collector and the typical collector flange that spins I welded to the header solid so I didn't have leaks. March billet crank pulley, low mount passanger side alt mount bracket and driver side low mount PS mount bracket. I have 6 24lb new GM injectors from a newer v6 that I never got more of to put on this motor.
I was offering this all to a local for $850 and him pickup, so make offer. I'd like to sell it all together but I don't see that happening.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 91 trans am vertcardomain
LSx - T56 - Fun
Sponsored Links
Registered users do not see this ad. Click here to register for free!
I know it's been awhile and I thought I had the header sold way back when but never got the moola. Friends are great friends until they have to pay.
So, I still have the header available. Motor, HSR, headers and all associated other stuff is gone.
So the header is meant to mount a turbo in an LSx swapped third gen? I'd really be interested in a pic if possible! Is the turbo on the pass side or driver side? Thanks.
__________________ 1986 Trans Am, 2005 5.3 LM7 engine, LS6 intake manifold, cam, LS6 clutch assembly, T56 transmission w/ Hurst pro billet shifter, 95 TA 4.10 posi rear with heavy duty cover.
-Coming soon....dyno sheets!
1986 Trans Am, 2005 5.3 LM7 engine, LS6 intake manifold, cam, LS6 clutch assembly, T56 transmission w/ Hurst pro billet shifter, 95 TA 4.10 posi rear with heavy duty cover. 
