[PA] Holley Stealth Ram (mild ported) with fuel rail kit
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Holley Stealth Ram (mild ported) with fuel rail kit
Selling my Holley Stealth Ram setup with fuel rail kit and adjustable holley regulator.
Need some money to keep funding the turbo build since its soo close to being finished.
This setup was on my L98 with full bolt ons and allowed me to go 12.95 at 103.8 mph. One of the best bolt ons I've tried.
Put this on my 383 with AFR 195 heads, ported the stealth ram abit to better match AFR head port which is almost same as 1205 gasket. Opened up the runners a touch and rounded off the edges where the plenum sits to smooth airflow into the manifold. Quick port job, plenty of material left and could be opened up and smoothed out more but I stopped. Ran mid 11's on motor and mid higher 10's on a 150 shot with this setup, thats why the runners have abit of darker coating in some areas, not all washed off when i stripped the paint.
This used to be painted red with black plenum but I stripped it clean. I'd say 99.9% of the paint is off, just some areas you can see a touch of red tint. More effort with stripper and powerwasher or wire brush will clean it all up but you cant really see it anyway.
AFPR works fine i've been lucky with this setup as alot seem to fail but it holds fuel just fine. All fittings are included, including a fuel pressure gauge 1/8 NPT fitting. NO GAUGE tho, reused it for my other regulator for new motor. $20 summit gauge will complete the setup. Plenum bolts are included, just not in the picture, forgot to add them in.
There is a slight blemish on the plenum rib on the passenger side front corner where it rubbed on the stock hood. I had poly motor mounts and the hood would touch the plenum and rubbed it alittle flat. Cant get a better pic if needed
Asking $375 shipped Need this gone.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Re: Holley Stealth Ram (mild ported) with fuel rail kit
Willing to split up? I want the rails.
__________________ 88 Iroc M5...3.54 Richmond Gears in a Dana 44, SLP CAI, Flowmaster catback, B&M Ripper Shifter, March Pullies, Edelbrock Strut Tower Bar Brace, Eibach Pro-Kit Springs, Hotchkis Subframe connectors, Poly bushings all the way around... more to come...hopefully
Re: Holley Stealth Ram (mild ported) with fuel rail kit
I am very interested. Does it have baseplate bolts along with the gaskets? (plenum > runners, baseplate > heads).
Also would you ship it free to T5X-5Y4.
Thanks buddy!
__________________ 1988 Trans Am GTA / Dynomax Muffler w/ 3 inch pipe / K&N filter / Lucas 24 lb Injectors / Falken Ziex ZE-502s / Accel Hi-Perf. Cap and Rotor / Accel Silicone Plus Graphite 8.8mm wires / Upgraded Windshield Wipers = )
Re: Holley Stealth Ram (mild ported) with fuel rail kit
Great deal; $550 new.
If I didn't already have one would be on it.
Hell, if nobody wants to front up your asking price I might pay the exorbitant shipping to post to me in Australia.
What is the total weight; mine is on the car so I can't weigh?
Re: Holley Stealth Ram (mild ported) with fuel rail kit
basterd!
you must have an alert setup for when the words stealth ram appear here :P
if you're willing to put on ebay i'll pay ur asking price plus shipping
Re: Holley Stealth Ram (mild ported) with fuel rail kit
I never trust anyone that says god blessed in a post, particularly when they say god blessed, not god bless.
Last basterd i bought something off here said he was off to church and then to post my complete TPI setup with xfi ecu......
I'm still waiting.
14psi, street tune 
mo
