Kansas Performance part-out, pictures, low shipping, priced to sell - Third Generation F-Body Message Boards

thewolf · 08-31-2009, 10:33 PM

Most of these parts have received little to no wear, though they were installed on a 1984 Pontiac T/A for a short period of time. Basically a restoration that never went anywhere. My loss is your gain. Some prices are more negotiable than others. I'm open to reasonable offers.

Let's make shipping easy. If you are in the lower 48 states, here's how it works.

Purchase Amt
$0 to $99 : +$8 shipping
$100 to $249 : +$16 shipping
$250 and up : free shipping

How cool is that? If you are not in the lower 48, please contact me for a quote. I will do my best on shipping paid orders as fast as possible. I know I'm going to run out of boxes soon unless one person buys everything. Everything goes UPS Ground.

Items start here

Everything left is headed to the local swap meet. Thanks for a successful sale!

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

IROC-Z28_CAMARO · 08-31-2009, 10:46 PM

pm'd

toxik IROC · 08-31-2009, 10:51 PM

will the ds loop work with a umi cross member ?

thewolf · 08-31-2009, 10:56 PM

Quote:

Originally Posted by toxik IROC

will the ds loop work with a umi cross member ?

Depends on the crossmember probably. This ds loop uses two bolts and must have the poly trans mount.

89IROCZ28 · 08-31-2009, 11:06 PM

PM sent on struts

thewolf · 08-31-2009, 11:23 PM

2 sales, all PM's up to date. Posting updated with sold items.

racing geek · 09-01-2009, 12:48 AM

I'm interested in the master cylinder and maybe the ball joint and front seat belts too.

Mike

5215 · 09-01-2009, 01:58 AM

PM'd

watajob · 09-01-2009, 02:04 AM

PM sent.

thewolf · 09-01-2009, 08:40 AM

Quote:

Originally Posted by racing geek

I'm interested in the master cylinder and maybe the ball joint and front seat belts too.

Mike

I could do $140 shipped for those items. Nothing overly large or heavy, and you aren't very far away.

thewolf · 09-01-2009, 08:40 AM

2 sales, 3 pending, all PM's up to date. Posting updated with sold items.

racing geek · 09-01-2009, 09:05 AM

Quote:

Originally Posted by thewolf

I could do $140 shipped for those items. Nothing overly large or heavy, and you aren't very far away.

Was the master cylinder ever even mocked up or has it been in the bag the entire time? Is it a new unit or is it just refurbished? Do you only have the one ball joint? When comparing colors, how close is the ebony to the black thirdgen seat belts?

Thanks
Mike

thewolf · 09-01-2009, 09:31 AM

Quote:

Originally Posted by racing geek

Was the master cylinder ever even mocked up or has it been in the bag the entire time? Is it a new unit or is it just refurbished? Do you only have the one ball joint? When comparing colors, how close is the ebony to the black thirdgen seat belts?

Thanks
Mike

The master cylinder has never been installed. I'm sure it's been out of the bag, but never mounted or bench bled with fluid. I'd have to check the box to see if it is new or refurbished.

Yep, just the one ball joint.

I don't have any third gen belts to compare to, but the plastic on the belts is definitely black. The belts themselves are more of a carbon gray.

thewolf · 09-01-2009, 11:34 AM

2 sales, 4 pending, all PM's up to date. Posting updated with sold and pending sale items.

godreject · 09-01-2009, 12:44 PM

interested in those Umi lower control arms let me know if sale doesntgo through, thanks

thewolf · 09-01-2009, 01:02 PM

Quote:

Originally Posted by godreject

interested in those Umi lower control arms let me know if sale doesntgo through, thanks

I sent him a PayPal invoice, so I'm marking them as sold.

Scorpner · 09-01-2009, 02:07 PM

PM sent.

thewolf · 09-01-2009, 02:42 PM

4 sales completed, 3 more pending, all PM's up to date. Posting updated with sold and pending sale items.

thewolf · 09-02-2009, 03:59 PM

5 packages shipped, 2 pending sales. Lots of nice stuff still available at low prices. All PM's and the original post up to date.

racing geek, am I still holding stuff for you?

racing geek · 09-02-2009, 04:49 PM

Yeah, sorry. I'm trying to figure a way to fit it in the budget.

Any update on if the MC is new or just refurbished? Where did you get the ball joints? I've been searching for them but can't seem to get any info. Were the seat belts from a car that was ever in an accident? No cuts or frayed threads on it?

You use paypal right?

thewolf · 09-02-2009, 05:32 PM

Quote:

Originally Posted by racing geek

Yeah, sorry. I'm trying to figure a way to fit it in the budget.

Any update on if the MC is new or just refurbished? Where did you get the ball joints? I've been searching for them but can't seem to get any info. Were the seat belts from a car that was ever in an accident? No cuts or frayed threads on it?

You use paypal right?

I did look at the MC box, no indication of whether it's new or remanufactured. I got the ball joint from Rock Auto a while back. I got the belts used off of eBay, so I can't be sure of the history. There is no fraying or cuts on the belts though. They look pretty sharp.

Paypal is fine with me. I have one customer mailing a money order, that works too.

thewolf · 09-04-2009, 02:42 PM

2 more packages shipped, 1 pending sale. All PM's and the original post up to date.

5215 · 09-05-2009, 03:45 AM

Got mine! (Steering box brace) Thanks for the quick sale!

89IROCZ28 · 09-05-2009, 10:50 PM

Received the struts & adj panhard bar. All in great shape. Thanks!

Scorpner · 09-09-2009, 03:42 PM

Received everything in excellent condition. Thank you!

(I was the money order guy.)

IROC-Z28_CAMARO · 09-15-2009, 08:20 PM

Recived my stuff today. Excellent packaging and quick shipping. AWSOME GUY TO DEAL WITH

Thanks Kent