You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a BDR 2400-2800 rpm stall torque converter with lockup
it is a 31 spline $200.00 plus shipping
also have a set of heddman long tube headers for 3rd gen camaro/firebird modified to fit a manual trans setup.(not hacked or hammerd like some that ive seen )..... $110.00 plus shipping
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
not yet i should have them by the weekend.the headers have been on my car for 2 yrs with no issues...i even run them now with the 700r4 but im changing some stuff around while i have the transmission out.....instead of beating the headers i fabricated clearance for the clutch slave and welded it up real nice without restricing the exhaust flow.they are also ball and socket flanges
__________________
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
here is the pics of the headers the last one is the modified one for clearance for the clutch slave
__________________
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
it is a 12" sorry......thought you were sking the rpm range of the stall
__________________
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
it would flash about 2800-3000 in my car seeing as it was supercharged............never foot braked it...this converter has less than 2000 miles on it as well ///it is a real nice converter only reason i changed to a higher stall was because i changed a few things on my car. ill do 235.00 shipped to your door
__________________
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
Last edited by Badass355ciz28; 09-15-2009 at 09:49 PM.
received headers today, looked better than in pics. great guy to deal with fellas. i am very satisfied,prompt shipping,great packaging, thanks again steven,jimmy
........i tend to like doing business the right way......and not leave ppl hanging ......glad you liked them and yes i made sure they were packaged well.........
Last edited by Badass355ciz28; 09-17-2009 at 11:38 PM.
Sbc 355, trick flow g2 heads ,isky roller cam,B&M roots blower(10 psi) built 700r4 tranny with a 3500 stall ATI 9.5" converter, LS-1 driveshaft,3.73s with tons of other mods!!!!!!!!!
........i tend to like doing business the right way......and not leave ppl hanging ......glad you liked them and yes i made sure they were packaged well......... 
