You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Holley Stealth Ram, $800.00 SOLD
I removed the HSR from my 427 SBC after only 700 miles since it does not flow enough for my combo. Included is the manifold, plenum, custom top plates, fuel rails, new Accel 30LB injectors, IAC, TPS, Lokar, throttle cable bracket, K&N AIr filter and Weiand thermostat relocation manifold (not pictured) and 58mm throttle body.
The manifold is for 23*.
The plenum and top plate are powder coated Satin Black and the Manifold is powder coated "reflective Chrome" I do plan on stripping and recoating the manifold so if someone wants it a different color that can be arranged.
The original fuel rails pictured have been replaced with a brand new set of Edelbrock rails and can also be coated.
Also included is a Glow wire setup that back lights the bowtie emblem in top of the plenum.
NOS Two stage Cheater system. $550.00 Sale Pending
I ran this on the original 305 in my Monte Carlo. Everything pictured is included and it all worked great when I removed it during my engine swap.Everything pictured is included. The pump is an Edelbrock 140gph mechanical, two Holley Fuel Pressure regulators, hoses, fitting and base plate.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ Original Owner;
1986 Monte Carlo SS
427 SBC, T56
Last edited by John S; 09-18-2009 at 11:14 AM.
Reason: Stealth Ram is Sold
Sponsored Links
Registered users do not see this ad. Click here to register for free!
I'm interested in the HSR setup but will this work with vortec heads? also it looks almost like a bolt on, what else would be required to set this up on my 350? Also if you can... shipping to 08648 New Jersey?
Sorry, this manifold will not work with vortex heads. The bolt holes for the 23* are angled, my understanding is that the vortex heads bolt straight down.
__________________ Original Owner;
1986 Monte Carlo SS
427 SBC, T56
