S350

I am looking to gain some interest for TBI parts that I have. They were used on my 1996 S10 with TBI 350. So far best to date with these parts it has run 13.22 @ 102.75. It runs with shorty headers and duals right out to the roll pan. Open the exhaust or even full length headers would pick up some time. The truck has a powerglide in it so with a Turbo 350 or a 700R4 and that extra gear would make a big difference but the Powerglide is the only thing I have. The chip still needs to be tuned as it was done last year before I made some changes but driveability and performance is great. I am looking to sell this stuff because I am no longer driving it on the street and just racing it, so I am switching to a carb. If you have any questions I will glady answer them, also looking to sell some stuff as a package but will seperate. Will also post it in the for sale section. Below are the parts. Thanks, Allen Holley TBI Projection Intake #300-49 454 Throttle Body w/ 85 lb/hr injectors recently sonic cleaned and flowed Comp Cams XFI Hydraulic Flat Tappet cam with lifters #12-364-4 MSD Pro Billet Distributor #8366 MSD Blaster Coil #8226 Painless Wiring TBI wiring harness #60101 Howell EFI TBI tuned chip

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

ericjon262

get a better computer, you don't mention what you have for a gear in the diff. or the weight of the vehical, so that does make it a little more difficult to tell you what to do.

what rpms are you turning as you cross the finish line?

Edit, I see you have 4:30 gears, I would probably drop a th350/400 in to make up a little more on the finish end of the track.

S350

I got a deal on 2 glides traded the other to our transmission guy who did work on it in return. It has all the good clutches and drum, and is set up for a tranny brake. I am turning 5500 through the traps and pulls the whole way I am just looking to change. Mainly ran TBI because I had to deal with emissions when I was driving it on the street.

Allen

dctrumpet

what would you like to get for the 454 TBI with injectors and the Holley intake?

S350

Now have my truck in a shop for the winter and now able to begin taking stuff off. Ive updated my list with some other items and prices all in USD not including shipping. Any questions feel free to PM can also send pictures. Take money order or Paypal.

Holley TBI Projection Intake #300-49
$125
454 Throttle Body w/ 85 lb/hr injectors recently sonic cleaned and flowed
SOLD
Comp Cams XFI Hydraulic Flat Tappet cam with lifters #12-364-4
$100
MSD Pro Billet Distributor #8366
$100
MSD Blaster Coil #8226
$30
Painless Wiring TBI wiring harness #60101
$200
Howell EFI TBI tuned chip
$50
Painless Wiring Speed Sensor Signal Generator #60117
$75
Accel / Walbro Electric In Tank Fuel Pump 255 lph (used July-October)
$75
Dakota Digital Universal Speedometer Signal Interface
$50


Thanks, Allen

dctrumpet

PM Sent

dctrumpet

I sent PM last night????

S350

PM replied

S350

Throttle Body Sold

fastrs1891

will the Holley TBI Projection Intake #300-49 fit on a 305 tbi camaro? this is the intake manifold right??

S350

Here is a link for more info on the intake. http://www.jegs.com/i/Holley/510/300-49/10002/-1

Intake has a brand new EGR on it and the edelbrock adapter for the EGR to fit with the 454 throttle body. http://www.jegs.com/i/Edelbrock/350/1476/10002/-1

Thanks, Allen

fastrs1891

oh. i need the one for cast heads not aluminum ones. thanks anyways

kbraxton68

is $100 the best you can do on that cam ? I'm interested ! Thanx Kent. and what heads were you running ?

S350

PM replied

graebz28

Subscribed! Might use some of that if it is available when I get $.

S350

TTT