You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
SOLD
I have a LT1 T56 I've just rebuilt. It has LS1 T56 internals from a unit that was upgraded with Viper internals. This unit has carbon fiber blocker rings and a stock rebuild kit installed. All the gears and synchros have been cleaned and checked, and the unit reshimmed with performance specs. LT1 bellhousing and slave spacer are included or can be deleted for credit.
$1200 + SH (~$130), or can arrange pickup within 50mi of 19711 zip.
thanks
mike
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
i'll keep you posted on purchasing, i need to work out my finacing a lil bit
I can take a deposit to hold it for a month. I can also upgrade it with any/all of the parts from a 700hp kit, for the price of the parts. (I have a full 700hp upgrade kit on the shelf) Just shoot me a PM.
bump for you
This aint bad guys.
I paid 1000 for mine a couple of years ago and it did not have as through a going over as this one. Just touching one of these in your own garage gives the fuzzy feeling.
Again, as of today, still available on the T56? I have a 91 Z 350 700R4 looking to convert. The bell housing from the LT1 is fine but is the spacer necessay? Thanks.
Again, as of today, still available on the T56? I have a 91 Z 350 700R4 looking to convert. The bell housing from the LT1 is fine but is the spacer necessay? Thanks.
Yup, still for sale.. The spacer goes between the bellhousing and the hyd slave.. They are no longer sold. It's required to mount the slave and attach to the shift fork. It's not a spacer for the clutch or transmission..
