You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
GM Chevy BOP SBC Factory 350 CID Forged Steel Crankshaft. This crank has been Media Blasted, Magnafluxed, Turned .010/.010, and Balanced for 1800-1900 gram rotating assembly piston and rod. It is currently properly stored with cosmoline. All you would need to do to use this crank in for a 350 is clean it and blow it off real good with compressed air! 2 Piece Rear Seal. Stroke is 3.48" - with a standard 4.0" Bore = 350 CID. If you are .030 over bore would = 355 CID This crank is ready to go.
$400.
Thanks,
Dave
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 1987 El Camino SS
Displacement = 357 CID 10.5-1.
Intake = Lingenfelter Super Ram w/30 lb injectors and now 52mm TB, from 58mm.
Heads = AFR 195 Street Eliminators.
Cam = Lingenfelter 219/219 .560/.560 112 LC.
Exhaust = Doug Thorley Tri-y 1 5/8" Headers, 2 1/2 collectors and 2 1/2 exhaust.
Computer = 1227730 w/NVSRAM and S_AUJP_V4 Bin File.
Transmission = 700-R4 going to 200-4R.
Rear End = Grand Nationals 8.5 Posi w/342's.
Brakes= In progress C-5 Front 13" 4 Piston and 12" Rear 2 Piston.
Sponsored Links
Registered users do not see this ad. Click here to register for free!
