Home   Register  FAQ  Members List  Calendar  Garage  Search  Today's Posts  Mark Forums Read 



Go Back   Third Generation F-Body Message Boards > Classified Boards > Parts Wanted > Engine/Drivetrain Parts Wanted
Reload this Page need a cam/springs

Reply
 
Thread Tools
Old 09-05-2006, 09:12 PM   #1
pr0zac
Member
 
Join Date: Jul 2004
Location: rhinebeck new york
Posts: 132
Car: 1991 z28
Engine: forged 385 with afr's
Transmission: built 700r4
Axle/Gears: 9" and 4.56

Classifieds Rating: (0)
Send a message via AIM to pr0zac
need a cam/springs
wondering if anyone has a larger than stock hydaulic roller cam for either an lt1 or a 87 up block. also if you have matching springs for it too.. doesn't need to be brand new. thanks.
pr0zac is offline vBGarage Page   Reply With Quote
Sponsored Links
Old 09-05-2006, 09:53 PM   #2
88 350 tpi formula
Senior Member
 
Join Date: Dec 1999
Location: WI,USA
Posts: 2,970
Car: 89 FORMULA 350
Engine: 8 cylinder
Transmission: one with gears
Axle/Gears: BW 3.70

Classifieds Rating: (3)
I have some very good springs that are new in the box isky #235-D I got them with the cam I have in my 89 formula 350. since my heads used a larger diameter spring I never used these. these will fit stock size spring pockets and will work great with cams around the lt4 hotcam specs or similar. I really have no use for them so shoot an offer and I am sure we can work out a smokin deal for you!


I have a unused l98 cam as well if you are just looking for something to run with some 1.6 rr.
88 350 tpi formula is offline vBGarage Page   Reply With Quote
Old 09-07-2006, 09:50 PM   #3
badazta87
Junior Member
 
badazta87's Avatar
 
Join Date: Oct 2004
Location: Akron, OH
Posts: 83
Car: 87 GTA, S-10
Engine: 355ci HSR, v6
Transmission: T-56, Auto
Axle/Gears: 3.70:1

Classifieds Rating: (1)
Send a message via AIM to badazta87
I have a zz9 cam from TPIS has about 3000 miles on it. make an offer
badazta87 is offline vBGarage Page   Reply With Quote
Old 09-07-2006, 11:16 PM   #4
FORMULA355TPI
Senior Member
 
FORMULA355TPI's Avatar
 
Join Date: May 2002
Location: BENSALEM, PA
Posts: 268
Car: 88 FORMULA / 88 IROC
Engine: 355 / 355
Transmission: T5 / TH400
Axle/Gears: 10 Bolt-3.73 / 9"-3.90

Classifieds Rating: (0)
Send a message via AIM to FORMULA355TPI
I have a blue racer roller hydraulic for factory roller block.. It came with a motor I bought. But I decided to pull it to go with a solid roller unit.. I have the cam, lifters, spider, links, and thrust plate.. I do not have the spec card for the cam but the grind number is 960840.. The cam was never ran but was oiled and installed. $150 for everything..

Josh
215-783-4645
__________________
FORMULA355TPI is offline vBGarage Page   Reply With Quote
Old 09-08-2006, 05:29 PM   #5
pr0zac
Member
 
Join Date: Jul 2004
Location: rhinebeck new york
Posts: 132
Car: 1991 z28
Engine: forged 385 with afr's
Transmission: built 700r4
Axle/Gears: 9" and 4.56

Classifieds Rating: (0)
Send a message via AIM to pr0zac
Quote:
Originally Posted by badazta87 View Post
I have a zz9 cam from TPIS has about 3000 miles on it. make an offer
what are you looking to get? do you have springs?
pr0zac is offline vBGarage Page   Reply With Quote
Old 09-08-2006, 05:30 PM   #6
pr0zac
Member
 
Join Date: Jul 2004
Location: rhinebeck new york
Posts: 132
Car: 1991 z28
Engine: forged 385 with afr's
Transmission: built 700r4
Axle/Gears: 9" and 4.56

Classifieds Rating: (0)
Send a message via AIM to pr0zac
where could i find specs on this cam??
pr0zac is offline vBGarage Page   Reply With Quote
Old 09-08-2006, 05:50 PM   #7
pr0zac
Member
 
Join Date: Jul 2004
Location: rhinebeck new york
Posts: 132
Car: 1991 z28
Engine: forged 385 with afr's
Transmission: built 700r4
Axle/Gears: 9" and 4.56

Classifieds Rating: (0)
Send a message via AIM to pr0zac
where could i find specs on this cam??
pr0zac is offline vBGarage Page   Reply With Quote
Old 09-09-2006, 10:00 AM   #8
FORMULA355TPI
Senior Member
 
FORMULA355TPI's Avatar
 
Join Date: May 2002
Location: BENSALEM, PA
Posts: 268
Car: 88 FORMULA / 88 IROC
Engine: 355 / 355
Transmission: T5 / TH400
Axle/Gears: 10 Bolt-3.73 / 9"-3.90

Classifieds Rating: (0)
Send a message via AIM to FORMULA355TPI
Mine? I really dont know, Crane bought Blue Racer so theyre records are pretty inacurate and sometime non-existant.. If you are interested I will have it checked out...
__________________
FORMULA355TPI is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Classified Boards > Parts Wanted > Engine/Drivetrain Parts Wanted
Reload this Page need a cam/springs
« Wtb/sbc hydrauluic roller cam | In need of a proportioning valve »

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Forum Jump

 

All times are GMT -5. The time now is 02:23 AM.

Contact Us - ThirdGen.Org - Advertising - Privacy Policy - Terms of Use - Jobs - Top

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0 RC3
All content copyright © 1997 - 2008 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.