You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
This is going into my iroc. It is an 89, with a 305 tpi originally. So the is that ecm acceptable still? Or do I really need the whole new ecm? Are you offering to sell the one you have? haha, I couldn't quite tell.
I have a TPI 350/Auto Prom in my 165 computer in my 89 Formula. Let me check what the chip's code is and make sure it's 89 but, it would probably suit your needs quite well. Though it has not suited my needs as I have an 89 305TPI 5 Speed, lol.
did the car you had with the 305 have tpi or tbi. if it was tbi you will need to replace the wiring harness in front of the firewall and behind it. so get every wire you can find and dont cut anything.
i want to thank you for posting that site. i was able to get all the codes for the 91 350 tpi that i am swapping into my 90 305 camaro. that was really helpful.
you are one lucky man - i have to pull every wire with my 305 tbi and put the tpi stuff in but i dont want to do that until i get the heads.
be sure to keep everyone posted with how the swap goes.
good luck.
Hmm, well i am sorry that I gave you false hope - It turns out that the one I have is an APYR, which is listed on several sites as:
APYR 3506 3501 Auto 2.73/2.77 Fed F
Though the interesting thing is that I have an OTC Monitor 2000 and when hooked up across the ALDL connector it reads it as a 350/Auto Chip. Sorry man.
you are one lucky man - i have to pull every wire with my 305 tbi and put the tpi stuff in but i dont want to do that until i get the heads.
be sure to keep everyone posted with how the swap goes.
good luck.
Haha bummer, but hey, projects have to be hard, or they wouldn't be fun!
here is another site with the prom numbers that my82roc sent me, I think its a little less confusing than the other one!
Hmm, well i am sorry that I gave you false hope - It turns out that the one I have is an APYR, which is listed on several sites as:
APYR 3506 3501 Auto 2.73/2.77 Fed F
Though the interesting thing is that I have an OTC Monitor 2000 and when hooked up across the ALDL connector it reads it as a 350/Auto Chip. Sorry man.
Hmm yeah, that would be a 305 auto chip, strange that it scans as a 350 auto chip. Thanks anyway!
yeah, i have a saved copy of that page on my computer. Hey, if you run out of luck i might be able to burn you a prom - a stock image of one that is. I couldn't find the chip i needed so I bought a Willem programmer. I ended up burning a APYS the other day for my car on a EPROM that can be erased/rewritten electrically.
I think I spent $15-$30 on the programmer (I bought it last year, never got around to using it till now) and a used "flash" chip for like $7 (lol, it says "ALTEREDIMPORTS" on it, haha). I'm gonna be plugging it in in a couple days, wish me luck.
Like I said, I could burn you a chip, but you would have to install it into an existing MEMCAL (err, I don't think it's actually a MEM-CAL on a 165?). But, be warned - I'm not trying to sell you the service - the chips are like $7 on ebay shipped, then I would just burn it and ship it to you. What you do from there is up to you.
I know how it is to have the wrong chip! I feel your pain!
Yeah, I'm still looking for one too hence, why I have this thread..everything seems to lead me to dead ends though. I can't believe noone has one...
WHAT???? 1st you told me someone else had 1 you were going to buy. 2nd you said you had to do some more checkng if this is what you want. 3rd you told me you didn't need it and you were going a different direction.
WHAT???? 1st you told me someone else had 1 you were going to buy. 2nd you said you had to do some more checkng if this is what you want. 3rd you told me you didn't need it and you were going a different direction.
Today you still can't find one????????????
I PMed you back last Thursday saying the deal fell through. And I asked if you still had it, and if you did if $100 + shipping firm would do it, and if you accepted paypal. A week later with no response made me assume you no longer had it/you weren't accepting my offer.
I PMed you back last Thursday saying the deal fell through. And I asked if you still had it, and if you did if $100 + shipping firm would do it, and if you accepted paypal. A week later with no response made me assume you no longer had it/you weren't accepting my offer.
The last time we wrote each other was a couple of weeks ago. I wrote you and asked if you found out the info on the ECM you were looking for and that was after you left me hanging for over a week.
In your return responce you said you were going a different direction or something and didn't need it.
The last time we wrote each other was a couple of weeks ago. I wrote you and asked if you found out the info on the ECM you were looking for and that was after you left me hanging for over a week.
In your return responce you said you were going a different direction or something and didn't need it.
I NEVER said $100 firm plus shipping!!!
MY offer to YOU was $100 plus shipping firm! I have the pm I sent you in my sent items folder on 06/04/2009 which is when I made that offer.
MY offer to YOU was $100 plus shipping firm! I have the pm I sent you in my sent items folder on 06/04/2009 which is when I made that offer.
I don't have anything like that from you on 6/4/09.
I'm asking for $85 plus shipping for the prom and if you would have offered me $100 shipped for the prom I would have takin it. Thats more than what I was asking.
I will buy the prom and the ecm if that is how you want to sell it. I just need it asap because I NEED to get this thing on the road.
I tried and tried with you but you had so many issues with the ECM #s and the one in your car with the updated #. I gave up on you.
I talked to the other member on the phone a few minutes ago and he is going to buy the prom from me but he might buy the ECM also if he can cancel the reman. ECM his mechanic ordered.
If things change tomorrow when he calls me and doesn't need it, I will let you know. Right now the ECM and prom are his.
I have a ECM out of a 89 firebird. it is a 165 ECM with a AUJM prom. Replaced it with a EBLflash. Was working when pulled. Also have a set of pink top ford injectors that were also on the same car but due to upgrades were too small. If interested get in touch with me....
