You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
One pair/set of barely used Air Flow Research 195cc SBC cylinder heads. They have 2.02 and 1.6 valves, angle plug, center bolt, upgraded spring package, extra water ports, and are angle milled to 58cc combustion chambers. Also have guide plates(not shown in pics). The guy I got them from said he had these heads on a 355 in a 91 camaro and only had about 2,500mi on the motor when he trashed his T5 5speed tranny and couldn't afford to work on that for now. Says he spent over $2,000 on these heads and they are worth it. I've already got a set of heads, so am selling these. I've got $950 in them, would like to get that out of them.
I've also got an AFR Hydra Rev kit for $150 from the same guy.
Or sell both the heads and the Hydra Rev kit to the same person for $1050
__________________ Old BEST
13.081@107 5800' elevation stock shortblock 100shot
new best
12.71@107.52 1.82 60' 4300'DA
ASCD RA hood, 1.6rr's, aluminum driveshaft, 383, AFR 195's, CC306 cam, Hooker long tube headers dual 3" to Mufflex3.5", Holley Stealth Ram portmatched to 1205 gasket, AFPR, Megasquirt, plus a 3000 stall and shift kit.ET street radials on formula wheels and billet specialties street lite fronts.
I'll get the numbers off the heads tomorrow for you. As for which angle, how do you tell the difference? I know they're angled, he told me so and I can tell that they are. gonna have to help me out here just a little bit, sorry.....
Looks like they are AFR #9758 and that they're the L98 angled plugs. Here's a couple of pix showing the #'s and with some plugs I put in to show the angles. Sorry about the harsh coloring on the plugs pix, looks like I brightened it up too much trying to make them show up.
I take paypal, too. Just add the 3% for their handling fee....
One other note - if I can sell them by noon CDT Monday 8/19/06, I'll either pay for the shipping inside the continental 48 states OR cover the PayPal fee myself - your choice.
First, no, my kidneys are still fairly healthy as far as I know, and I don't have any plans for keeping around a spare. Sorry. <LOL>
I've gotten a few responses via e-mail, PMs and the one here, so I'll respond to them in the order I received them.
TKO500 - you have a PM.
92lpeb4c - you're second in line, sent you a PM as well with some answers to your questions.
Pelle - I have no idea what the procedure to ship these to Sweden would be. If the first two guys fall thru, we can discuss how I might be able to do that. I know it would be mucho dollars to ship them though.
Thanks for the responses, hopefully someone will be holding a new (to them) set of heads real soon...
Additional note - since I have not run these heads personally, obviously there is no way I can guarantee anything on them. They look good to me and appear to be exactly what I've stated and in good condition, but I'm not a professional heads type person, either. Just wanted to make sure everyone realizes that.
hey vern ur more than welcome to have that nitrous pressure guage. So let me know how you want to arrange pickup or what not. Also were u interested in the edelbrock victor jr heads i have? let me know...aaron
