You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Marketing Description:
Strengthen your two-bolt or four-bolt block.
These aftermarket main bearing caps not only strengthen factory two-bolt blocks, but will add a measurable degree of strength to four-bolt blocks also. They're made from precision-machined high strength steel, which has the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so they pull from the side walls of the block and not the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap, and come with all necessary bolts, washers, and the drill bushing needed to complete the installation. These Milodon main cap kits are available in your choice of angled or straight bolts.
Last edited by Z-PDX; 03-03-2007 at 09:02 AM.
Reason: lower price
