You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
FS: 383short block,eibach's, agx's, sfc's, cams, and more
I've abandoned my third gen project and moved back to a 4th gen LS1 so this stuffs gotta go!!! All prices are somewhat negotiable, no low ballers please
- I've got a 383 stroker short block that was built from the original roller 350 outta my 89' GTA. It has a maximum of 5K miles on it. It has an Eagle steel crank, GM 5.7" "stage 2" Rods, and Forged Pistons. The rotating assembly was purchased from Speed-O-Motive back a few years ago. It was prof. assembled and balanced by Weimer Machine in Berwyn IL. However despite my efforts to keep it oiled over the last year of sitting it has developed a small amount of light rust in the cylinder walls. Nothing a quick hone job can't take care of, which I may do before it sells. PM me with any questions. I am looking to get $600 for the short block. this will have to be a local pick up item only, sorry.The engine is SOLD
- I also have a 700R4 trans with less then 5K miles on a fresh rebuild. I know it had a corvette servo installed at the time of rebuild and probably a shift kit but cannot not recall. SOLD
- Crane cams 2032 hyd. Roller camshaft. Great cam for stock or modified TPI cars. used less than 5K miles. Still looks new. $160 shipped
- Comp cams XR294HR Hyd. Roller camshaft. Duration @ .050 in.242/exh.248 lift in 540"/exh 562" on a 110 LSA, never got to use this cam, but was told it only had dyno time on it. Also still looks new SOLD
- Kevko 7qt oil Pan with oil pickup part # 1070NRH for sbc. Never used, only opened box for pics. New was $169 sell for $120 shipped
- Crane Cams High-Rev kit, great item to have to help reduce dreaded valve float. $60 shipped
-165 ECU for MAF cars. $65 shipped
- I have 2 Tq converters one is supposed to be a 2500RPM stall and the other 3000 RPM stall. I have not used either one of these so i cannot verify there performance. They do not have any markings on them to suggest who made them. Asking $60 each, prefer pick up these as they're pretty heavy and may not be worth shipping. Both converters SOLD
- Full set of KYB AGX adjustable shocks and struts new in boxes. $320 shipped
- Set of Eibach Pro kit springs. I can't remember how many miles are on them, I bought them used but never took them outta the box. They look unused and very well could be. $150 shipped SOLD
- Set of CGS brand Subframe connectors bolt-in/weld in style. Still new in the box. $130 shipped SOLD
I probably have more stuff that I have forgotten about, and will update this as I find it. thanks for looking.
Located in the Chicago Suburbs, feel free to PM me with any questions or if you need pics of anything.
Last edited by gmoney1082; 05-02-2007 at 10:12 PM.
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
PM sent about 383, 700, and a converter. Hoping to see pics. Thanks.
__________________ -Jeremy- EFI Calibration Engineer, Director of R&D, Software Designer, System Department Manager (Fuel Injection Technologies - dianpen.com) - Living in China since Nov '04!!!
86 Z28 - rusty, tired, needs to be put to sleep - 89 GTA 5.7L needs new paint and the parts on the shelf installed, 79 Malibu Classic with '91 L98, 4L60, 3.73
~Edelbrock open element air cleaner~Edelbrock TES headers and y pipe~3" Magnaflow converter~3" cutout~Flowmaster cat-back~AIR delete~3.73 posi rear end~UMI Panhard Bar~Monroe Sensa Trac rear shocks~Energy suspension poly torque arm bushing~Energy Suspension trans mount~
