You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have a gm tuned port system for sale.what i have are two different baseplates,one for early heads(early model smallblock chevy to 86 and aluminum heads) and the other for late heads(87 to 95 non vortec).i also have a set of slp runners and stock runners.it comes with a bbk twin 58 mm throttlebody and a bbk adjustable fuel pressure regulator.i also have two sets of fuel injectors,a stock set and a set of 32lb accel injectors(new).also a new holley intank fuel pump,never installed.the system comes with a painless wiring harness and a stock ecm.it also comes with distributor.i have well over 2500 invested.i am asking 1500 for all.
i am in meridian ms.
the injectors were only run for ten minutes and the painless wiring harness needs some wiring repaired.nothing major.i have two 1227730 ecm's and an aujp prom.i switched over to a carb setup
__________________ 92 Z/28clone.383sbc with flattop pistons.Comp Pro Mag 1.6 rockers.holley 750 and professional prod. hurricane intake,same as edelbroc per rpm airgap
Hooker Super Comp lt's.t-5 tranny with hays clutch
stock 10 bolt with 3.73 gears and superior axles suspention mods:Hotchkis adj panhard bar and SFC's and Spohn adj torque arm and trans crossmember.Lakewood LCA's and Comp Engineering adj shocks
so far best e.t. 7.54 1/8 mile with 1.660 60ft granny shifting
How much are you looking to get for the stock injectors? Are they all within the 14-18 ohms specification and what size are they? Can you send a picture to Gearhead2427@gmail.com.
sorry guys,i haven't been online in a while...........we will start with the painless wiring harness,when i removed the harness i found some wires were cut for some of the injectors.nothing major to repair .i paid 350 for it i'll take 200 plus shipping.it is for the speed density system.
the runners are for the 89 to 92.i they list for 345 from slp,i painted my intake and runners black.i will take 200 for the runners and bolts.i even have the installation tool also. i'll have to figure out shipping
i would prefer not to seperate the ecm amd memcal.....100 for both.
ecm is 1227730 speed density from a 91 firebird.
the injectors are actaully for a 92 corvette lt1. i bought them from the chevy dealership here. 100 for them....
Is the plenum ported or anything? howmuch for that and the TB is ist 52 or 58?
-T
the throttle body is a 58mm ,the plenum has been ported some......
i will sell both with the tps sensor,iac and intake air sensor for 350.plus shipping
----------
runners are sold,speed i'll get back to ya on the shipping
Last edited by wallyZ/28; 04-19-2007 at 01:31 PM.
Reason: Automerged Doublepost
okay i'll go this route:
1.bbk adpr with stock fuel rail:$100 plus shipping
2.bbk 58mm throttle body with fairly new tps and iac89 to 92 fbody:$300
3.1 stock base plate for 87 up:$50 plus shipping
4.1 mildly port stock base plate for 86 down:$50 plus shipping
5.2 sets of stock runners,one with 9th inj provision the other not: $50 each plus shipping
6.1 painless wiring harness for speed dencity set up'need some wires repaired
if it is a big deal i will repair the wires myself:$250 plus shipping SOLD!!!!
If you could PM me on a price shipped for the throttle body, injectors, and pump...just bought a supercharger kit and will need these for the install...trying to find best deal..thanks...zip 14561
Pretty good shape? I have several sets with large dings and dents, so I'm looking for some cosmetically nice runners...
ouch..........let me look this weekend ,they are at my parents house in the shed,i'll let ya know as soon as i find out.and i'll get ya some pics of them also
Cool deal. I'll be away from the computer this weekend, so I'll check back on Monday. Thanks again!
i went ahead and picked the runners up from my parents.i guess when i stored them the woukd be safe.i have one runner that looks mlike someone beat the heck out of it,one with a small ding or two and the other two have minor scratches maybe a really small ping.they would need some serious cleaning.i posted the prices thinking they were in ecellent shape.just to get rid of them i'll take 50 for both sets.
do you still have the stock LT1 injectors??
how many miles on them??
yes i still have them,probably about 7000 miles on them in over 6 years total.i didn't drive the car a whole lot,mostly weekend driver and track test and tune.
Whats up from V-Burg MS.Interested in the mildly ported plenum and maybe the throttle body.My wifes from meridian and we`re over there atleast once a month.Gimmie a good price on both and I`ll pick them up.Pics if you can to shadygab@yahoo.com.
not many of us on here.I`ve been meaning to get to the track over there.Maybe we`ll meet up over there when I do.Do they t&t on sundays?I work most saturdys.I`m sure I`ll atleast get the plenum but I really need the tb,money is just a little tight.It may take me a couple of weeks to get up enough for both,so if you get a buyer till I do thats cool.
