You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New items
Finally cleaning out the guarge, shed and house and figure before I go to ebay ill see what sells on here and give you guys first dibs. If you are interested in any of these items you can contact me at coreyace@ptd.net I have pictures of everything so feel free to ask for pictures of perticular items. I am located between harrisburg in PA for anybody who would be interested in local pick up as well.
PAYMENT METHODS - Paypal,Cash,Check,Western Union basically pretty flexible
*Items in list are from 1987 Iroc-z unless otherwise noted*
Complete TPI Intake includesSOLD
-RunnersSOLD
-Top and lower plenum (Lower plenum has been ported and polished)SOLD
-Fuel rails with some new o-rings SOLD
-Stock fuel injectors believe their 22lbs SOLD
-TPI Throttle Body SOLD
-Thermostat housing and stock thermostatSOLD
Complete Serpentine/VBelt Pulleys and brackets includes $75
-Ac compressor pulley
-alternator pulley
-power steering pulley
-water pump pulley
-2 crank pulleys one serp other serp and V-belt
Stock Ring and pinnon gears (7.5 rear 3.23 ratio) $45
Brand new Pistons and rings for a 355 (speed pro 10.2:1 comp ratio with 64cc heads) $90
Stock Distributer with cap/rotor and extra module SOLD
Brand new Edlebrock double roller timing chain P/N 7800 $35
Brand new stock timing chain $20
T-Tops in perfect condition included right and left $50
Oil pan $25
brake resevior and boost $45
Xlerator High performance muffler single in dual out $35
6 15" standard camaro Rims with no tires installed $45 each
stock LB9 Heads with valve assembly still installed $50 for set
T-5 Tranmission with approx 90k miles on it (Borg Warner #s on tranny are 61DKBU014440 and at top has DKB) $175
stock coil and fuel pump $25 for set
Brand new stock cam (never been used) $35
Fel-Pro complete intake gasket set (All gaskets for stock TPI unit) $25
Fel-Pro head gaskets (P/N 7733 PT-2) $20
2 sets of Fel-Pro Rubber valve cover gaskets $15
Brand new holley adjustable FPR for the stock TPI intake $80 thats $20 off
Holley EGR Block off plate for stock TPI intake $15
VORTECH SUPERCHARGER KIT for small block or big blocks includes
- Supercharge V-1 with bracket for a small block currently installed and 5 rib serp pulley
-Inline Fuel pump for the extra fuel you will need
-Boost Retard switch
-Fuel managment unit / kit and lines
-Oil lines for supercharger supply
-Ignition boost control with wiring
-Air duct working and brackets needed for install
**Selling for $1000 sells on ebay for 1500-1950 serial code is D-213-16 and as stated above its a V-1 complete kit
__________________ -1987 Iroc-Z camaro
-5 speed manual
-355 CI with Holley Stealth Ram intake and 58mm Holley Throttle body
-30lbs /hr Ford SVO injectors
-Holley Fuel Pump 255ltrs per hour
-High Volume Oil Pump
-AFR 195cc Heads with 2.02 1.6 valves & 1.5 Rocker Arms
-Comp Cams CS NR276HR-113 Camshaft specs are
- ADV DUR: 276 288
- DUR @ .050 224 236
- Valve Lift: .502 .520
- Lobe Sep: 113.0
-MSD Billet Distributer / MSD 8226 Blaster Coil
-MSD 6AL Ignition
-Autolite 3924 Spark Plugs w/ 8.5mm MSD wires
-Prominator PRO with craig moates fast switcher
-ECM- 1227165 (updated bin file to $6E code and using a APYP bin) *EGR / VATS Disabled with injectors single and double fire changed to 30 lbs/hr, FAN N20 disabled, updated SA tables from iroc 350 bin
-Base timing currently set to 6 degrees
-Fuel PSI is at 46
-EGR/AirPump/Cat/Air Conditioning DELETED
-Updated PCV system
-Throttle Body Coolant Bypass
-Meizier Electric Water pump with March pulley set for power steering and alternator
Last edited by Destructive099; 05-07-2007 at 08:56 AM.
Reason: Adding basic overview pictures
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
would like to buy the entire tpi set up. need a complete. wire harness, injectors, everything. do you have what i am looking for, cause i have money waiting in paypal......thanks
westicle1
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
Quote:
Originally Posted by westicle1
would like to buy the entire tpi set up. need a complete. wire harness, injectors, everything. do you have what i am looking for, cause i have money waiting in paypal......thanks
westicle1
As of now i got the upper plenum, runners, and ported lower intake as well as the throttle body.
Quote:
Originally Posted by Maroon89gta
Is the supercharger for TPI or carb application?
Supercharger I believe has a carb bracket on it atm however one can be bought for tpi quite cheap and all you would need is some basic air ducts with clamps charger also boosts around 6-8 with the pulley installed.
Quote:
Originally Posted by ssj2link
do u know how much it would cost to ship the tranny to 33076?
If its a residential address your looking at quite a bit around $300 if you got a business address it can be shipped too its Drastically cheaper
Quote:
Originally Posted by soultron
How about the Power Steering brackets?
Power steering brackets are yours for $40 or ill sell you all the brackets including the extra crank pulley for $75
Last edited by Destructive099; 05-05-2007 at 10:08 AM.
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
hey i really want the runners and base and plenum. email me at jcsereiko@comcast.net i need to know if these are the ones with the 9th injector hole and shipping cost to 60423. I have been having problems with your replys going through because of my computer was set on a high security setting. are these a matching set with them being ported or can the fit fine with a stock base?
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
How much for the Complete Serpentine/VBelt Pulleys and brackets, the felpro intake gasket set and the Brand new holley adjustable FPR for the stock TPI intake?
Last edited by BadBlueRoc; 05-05-2007 at 08:08 PM.
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
Quote:
Originally Posted by dwillis
price on edelbrock timing set,fuel pump,
$40 (double roller timing set), $35 (Fuel Pump)
Quote:
Originally Posted by BadBlueRoc
How much for the Complete Serpentine/VBelt Pulleys and brackets, the felpro intake gasket set and the Brand new holley adjustable FPR for the stock TPI intake?
Re: Lots of unique items forsale SPRING CLEAN UP! supercharger, tpi intakes, New item
Quote:
Originally Posted by wildjyoung
I will take the EGR block off plate, Holley FPR, and oil pan. Please send a total cost with shipping for area code 41005.
Thanks!
Total shipped to your door is $135 and as always once payment is received items will be shipped out right away and tracking information will be sent to you.
