You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Pro topline heads f/s
2.02/1.60 valves 200 runners 64cc with angle plugs
Brand new, never installed/ported or modified in any way
Requires 11/32 valves with +.100" stem length
Im throwing in 2 sets of forged pushrods that are +.100" length
Uses a Felpro 1206 gasket
Do a search on these heads if you have questions about them
The pushrod problem seems to have been corrected at the factory and you can see in the pics they holes are machined larger
They are the ones off ebay, the seller labeled them "Pro-Race"
Researching them I found that was one of a half dozen names with the most common being Pro topline
If you have a way to distinguish them otherwise, please let me know
Pro Comp is a completely different casting
Look at the exhaust side, the mating surface is different
Look at the intake side, Pro comp is drilled for standard and vortec intakes, next look at the intake flange next to the water jackets, again different
I don't mean to bust balls, but Protopline certainly have their name cast into the head. Protopline is NOT the same as ProComp, Pro Action, or any of the other "Pro" prefixed names.
Protopline, now known as RHS, are supposedly superior quality to the other Chinese-cast Pro-xxxxx heads.
