You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Building a 383 so Im swapping to carb. Heres a list of stuff Ive got left over. All of the engine parts were removed from a very low mile 97 350 vortec. I will post pics upon request. I am located near Charlotte NC, I prefer local p/u but will ship.
TPI base (has center holes slotted for use on later style heads), runners, plenum, throttle body (w/ sensors), fuel rails w/ holley AFPR, 86 model for coldstart injector and 22lb injectors - $275 obo
TPI harness (decent shape, not cut up or anything, has new MAF pigtail) - $60 obo
TPI 7165 ecm - has a 88 350 memcal (AUJP?) and a motes G1 with prom chip and zif socket - $75 obo
TPI air box w/ k&n filters - $50 obo
350 ESC module (brand new GM, ran for 3k) - $50 obo
062 vortec heads - 30-40k, no cracks, drilled for standard intake, great shape - $250 obo
Stock roller lifters, pushrods, timing set, and rockers - make offer
Comp magnum roller tip rockers (1.52 ratio, longslot) w/ balls and nuts - $90 obo
1 pc rms stock crank - std journals, needs to be polished - $80 obo (prefer local p/u but may ship)
8 Powder Metal rods w/ 350 vortec pistons - $80 obo (will make deal on rods, pistons and crank)
305 motor, rebuilt about 2 yrs ago and has been sitting, 10/10 crank, PM rods, flattop pistons, 10.5:1 comp, 52cc heads new valve job 1.94/1.50 stainless +.100" valves, isky 270/280 mega cam (dur 221/232, .465/.485 lift, 112 lsa), anti pump up lifters, melling m55hv oil pump and steel shaft, melling double roller timing chain, edelbrock performer intake -
I built this for a friend who never paid me and have well over $1000 into it, I would like to get $500 obo (no shipping unless you arrange it)
I think thats about it, I am open to all trades, heres a few things I need,
3 port return style regulator (4-9 psi), 700cfm and larger performance carbs, single plane intakes, y pipe for hooker long tubes, MSD boxes, t-5 pro 5.0 shifter, etc
Bump, deal pending on vortec heads. Make offers on the rest.
I also have the following
Edelbrock 600cfm Elec Choke - $100 obo
Edelbrock Performer intake - $75 obo
TPI large cap HEI distributor - make offer
Seth
Last edited by Bigseth; 10-27-2007 at 11:47 AM.
Reason: .
Bump, deal pending on vortec heads. Make offers on the rest.
I also have the following
Edelbrock 600cfm Elec Choke - $100 obo
Edelbrock Performer intake - $75 obo
TPI large cap HEI distributor - make offer
Seth
Large Cap HEI's are non CC, right? So how can you have a large cap HEI if it's a TPI unit?
