Used, but in very good condition, TPIS ZZX cam with step-nose for 1987-newer small-block Chevy. Hydraulic roller. .558 lift intake and exhaust. 240 degrees duration at .050 lift. 111 lobe separation. I bought this cam several years ago for a now gone project. Only placed in block for measurements. Never been run by me but it is used. I see no problems with the cam and the numbers checked out. $175 plus shipping. United States Postal Money Order ONLY. No checks, no offbeat money orders, no PAYPAL. United States Postal Money order only. I will ship United States Post Office by first choice. Second choice will be UPS but shipping could be slightly more. jmssrf@scrtc.com Also see my other parts ads for vortec TPI intake, roller lifters, rev-kit, Corvette valve covers, brackets, and more. jms

New, never run (but several years old) Crane hydraulic roller lifters for small-block Chevy.

#11532-16

Bought a few years ago for a now gone project. Only installed in block for measurements and mocking up.

NEW.

$300 plus shipping.

United States Postal Money Order ONLY. No checks, no offbeat money orders, no PAYPAL. United States Postal Money Order ONLY.

I will ship United States Post Office by first choice. Second choice will be UPS but shipping could be slightly more.

jmssrf@scrtc.com

Also see my other parts ads for vortec TPI intake, ZZX cam, rev-kit, Corvette valve covers, brackets and more.

jms

These lifters are NEW and fit any small-block Chevy through 1986.

This is a BIG cam for a 350.

However, it is really nice for a 383 or 400 small-block.

ttt

The TPIS ZZX cam would be a great cam for those with the need for higher rpm potential.

jms

If you want 400+ horses, this cam has a history of producing way above that.

jms

ttt

Anyone with some Christmas cash need some horsepower?

jms

The cam would make strong power. It is designed for 1987 and newer blocks but can easily be used in an earlier block.

The lifters are a few years old but are new. Only used to mock-up an engine.

jms

Sent PM

pm replied
Thanks,
jms

Cam still for sale and lifters still for sale.

jms

ttt for good parts

jms

Until February 1st---ONLY, I will take $150 shipped (US 48 states only) for the used ZZX Cam.

Until February 1st---ONLY, I will take $250 shipped (US 48 states only) for the new Crane hydraulic roller lifters.

United States Post Office money order ONLY.

jms

The ZZX cam will add a bunch of power to a tuned-port engine. Look it up at the TPIS web site.

whats the rpm range on the cam? no paypal? let me know send me ur address in a pm thankyou

Sending a pm

http://www.tpis.com/index.php?module...t%2FValvetrain

This is a $375 cam when new. I believe it is overpriced new, but my used price should be a good buy.

On page 20 of the 2001 TPIS catalog I have (the newest one I have), it says the ZZX cam pulled to 6300 rpm (408 hp at 5750 rpm) with a tuned port intake on a L98 and to 6500 rpm (465 hp at 6500 rpm) on the same L98 with a mini-ram intake.

As far as payment, I have to have a United States Postal Money Order. This protects both parties better than any other method I know.

jms

pm sent

The cam is still for sale.

The lifters are also still for sale.

jms

im interested in the roller lifters , but for that much i can get them at my work with a warrenty ,, good luck selling them, they look sweet

I ran 11.19@119 with that cam. I love the ZZ-X in my carbed 406.

Folks, it has come to my attention some of my replies have not been getting back to some of you.

If you have sent me a message, either by email or PM (private message) and I have not returned an answer, please let me know.

Apparently something is not working correctly on my end. I am certainly no computer expert, so, please, if you sent a message, and are awaiting a reply, please, please, contact me again at my regular email:

jmssrf@scrtc.com

I always try to reply to messages, so forgive me if you should have got one by now.

Thanks,
James Spear (jms)

To the last couple guys that pm'ed me and emailed me about the cam and/or lifters: I have responded.

If you don't get that response, please post here and I'll try to get back to you again.

I don't know what is going on with some of my messages not getting to the intended persons.

Thank you,
James Spear

Sale pending on lifters

Cam is still for sale.

Thanks,
James Spear

Cam is still for sale.

Lifters have been SOLD.

Received money order 2-8-08 and item shipped same day to Matt in Alabama.

ZZ-X cam is STILL for sale.

Thanks,
James Spear (jms)

Cam is still for sale.

jms

Sale Pending on cam

Lifters have been sold.

Thanks,
James Spear (jms)

ZZ-X cam has been sold, paid for and shipped.

The lifters have been sold.

Thanks to all that have inquired about any of the parts I had for sale.

James Spear (jms)