Romac balancer for SBC SFI approved - Third Generation F-Body Message Boards

406 S10 Man · 01-21-2008, 11:44 PM

I used this for 2 seasons, about 8000 miles. It is a 6.200" (they call it a 7" balancer for some reason) neutral balance unit for 350s and any other internally balanced motors. You can use it on a 383 or 400 if it is set up for internal balance.

It's SFI approved and a lot stronger than stock. I had two stock 8 inchers crack and one fell right off the crank. These are rather expensive new. I paid $225 for this one. It's worth the money to know that won't happen again. It's also a lot lighter than any 8 inch balancer.

It looks brand new as you can see from the pictures.

Those marks near the center bore are supposed to be there. I did not do that myself. They give a little bit more of a press fit to make sure it stays put.

$150 plus shipping. I also have a billet timing pointer for this. $20

406 S10 Man · 01-24-2008, 01:21 PM

back up.

Orr89RocZ · 01-30-2008, 04:04 PM

pm sent

406 S10 Man · 01-30-2008, 04:44 PM

Sold-both for $175 shipped