Rebuilt LT1 w/ 1k miles on it - Third Generation F-Body Message Boards

FASTERTHANUMARK · 02-05-2008, 07:40 PM

Motor was totally stripped down,tanked,cleaned,all new cam,rod,main bearings.Crank was polished,rods magnafluxed,heads taken apart and check for straightness,new seals and reassembled.Since the rebuild the motor has seen about 1k miles.I pulled back out to paint engine bay over winter.Since then I have sold everything and this I would like out of the garage too.It now is a long block w/ no cam and no intake setup.I do have the acc bracket,new ps pump,new alternator.A/C delete pulley and ps resv too.Any other questions just ask.Looking to get $400 or will seperate.

FASTERTHANUMARK · 02-12-2008, 02:21 PM

TTT

ssean92 · 02-12-2008, 05:02 PM

pmed ya

1986z28 · 02-12-2008, 11:57 PM

would you sell the water pump seperate?

ssean92 · 02-13-2008, 09:16 AM

Quote:

Originally Posted by 1986z28

would you sell the water pump seperate?

funny I asked him that too

FASTERTHANUMARK · 02-25-2008, 09:51 AM

Bump

Ymesss · 02-26-2008, 10:06 AM

where ya from in ohio?

FASTERTHANUMARK · 02-26-2008, 10:42 AM

IM'd ya

ssean92 · 02-26-2008, 04:05 PM

would you shipp it Dwane? might have a guy here that would want it for his bird

ssean92 · 03-12-2008, 04:23 PM

can you send me some pics and specs on the heads?

FASTERTHANUMARK · 11-17-2008, 07:52 PM

TTT

FASTERTHANUMARK · 11-22-2008, 01:31 PM

TTT
----------

Quote:

Originally Posted by FASTERTHANUMARK

Motor was totally stripped down,tanked,cleaned,all new cam,rod,main bearings.Crank was polished,rods magnafluxed,heads taken apart and check for straightness,new seals and reassembled.Since the rebuild the motor has seen about 1k miles.I pulled back out to paint engine bay over winter.Since then I have sold everything and this I would like out of the garage too.It now is a long block w/ no cam and no intake setup.I do have the acc bracket,new ps pump,new alternator.It has smooth polished alum v/c's on it and a Milodon anodized oil pan.All gaskets are Felpro permadry were applicable & the rear main seal is the teflon one.Has Melling oil pump and screen.Also have new Pioneer keyed hub & underdrive balancer.A/C delete pulley and ps resv too.Any other questions just ask.Looking to get $800 or best offer.Can include for additional $ a solid roller cam setup and Comp pro mag 1.6 rockers,GM guideplates.

I have made revisions to price & what state the engine is currently in.

FASTERTHANUMARK · 12-14-2008, 12:50 AM

TTT

FASTERTHANUMARK · 12-15-2008, 10:46 PM

ttt

FASTERTHANUMARK · 01-29-2009, 07:58 PM

Offers?

hartsmike · 01-31-2009, 05:47 PM

Still got it?

FASTERTHANUMARK · 02-02-2009, 09:16 PM

Sure do

ssean92 · 02-03-2009, 03:18 PM

Hey Dwane been trying to get ahold of you ....Call me or text me when you can

FASTERTHANUMARK · 02-09-2009, 01:15 AM

TTT

FASTERTHANUMARK · 02-10-2009, 11:43 PM

TTT Changed price

ssean92 · 02-11-2009, 04:28 PM

Bump for a great price...and were you get teh hub at.I am looking for a hub for my sfi balancer. I have the pioneer 10% underdrive one I cant find a hub for

FASTERTHANUMARK · 02-11-2009, 05:40 PM

Ill get the part number for ya.

FASTERTHANUMARK · 03-08-2009, 04:22 PM

TTT

hartsmike · 03-09-2009, 12:20 PM

How much You want for it now and what does it need to run?

Thanks

FASTERTHANUMARK · 03-09-2009, 12:29 PM

Where you located? Basically valvetrain,w/p,intake setup and oil pan.Its basically a long block w no valvetrain.

hartsmike · 03-10-2009, 10:50 AM

I'm in Tennessee.

hartsmike · 03-10-2009, 10:56 AM

What all will it need to be put in the car and driven? Crank? Cam? Bearings?

FASTERTHANUMARK · 04-13-2009, 10:03 PM

Well back up for sale.Sorry those who have PMed me I have accidently erased all my PMs.
This is a long block as of right now.It will need flywheel,valvetrain,intake setup,w/p and opti.

FASTERTHANUMARK · 04-29-2009, 11:26 PM

ttt

Wallyman · 10-14-2009, 08:57 PM

Still for sale? PM sent.

phoenix_rising · 10-14-2009, 09:11 PM

Very motivated to buy. Is it available for sale? I am within driving distance to pick up. Please PM me.

inthe10s · 10-15-2009, 01:16 AM

What casting # are the heads? How much for the heads and valve covers shipped to NJ 08873?
Thanks,
Jerry

FASTERTHANUMARK · 10-18-2009, 11:17 PM

Sorry, not getting email notifications ,but its sold already and I forgot to change it