You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
all from my mint 92 RS with a TBI 305. Have the exhaust manifolds w/AIR still intact and perfect, all the AIR hoses etc(still pliable), smog pump, etc. Also, all the A/C stuff with the exception of the compressor(I'm keeping it for the S10) Still have the original y-pipe and cat along with a dynomax 2 1/2" catback setup(all with low miles on it) This stuff is all in great shape and recently taken out to make room for my LS swap. It's all taking up room in my storage. Make some reasonable offers or come and get it in Pensacola Florida. It'd be virtually impossible to ship the exhaust parts but I'll put them out here anyway. Thanks, Bill
__________________ my poop stinks
92rs/6.0LSx
th350
moser 9"
life on jackstands is expensive too!!
hey, I am interested in all the smog stuff, minus the manifolds themselves and the air tubes that bolt to the manifolds. Specifically I need the rubber hoses, and the metal tube that runs down to the cat. Please let me know if you have any of this stuff. Thanks
Will, I'll have to see what all I have and try to find it. It's been so long since I posted this I probably moved just about everything. I know that I have the cooling tube for the cat(it's still on the cat I think) I should be back stateside in a few days and will try to see what I can find over the next few days. Thanks for asking....
__________________ my poop stinks
92rs/6.0LSx
th350
moser 9"
life on jackstands is expensive too!!
if your still selling stuff off for that swap I need the accessory brackets off the motor
I've got all the aluminum brackets that held the PS pump, AIR pump, alternator etc. The PS pump is still on the drivers side bracket too along with the hoses. Once again, when I get back on good ground again I'll hit my storage and try to find everything and even make a new listing. Flying WAAAAY to much right now!!
here's the manifolds. They are in really good condition, no stripped holes or broken studs to deal with either. All of the studs in the manifolds are perfect and the one bolt hole in well threaded. No cracks and all the AIR tubes are in tact(one is loosened up because I was going to take them off and never went any further!)
a/c stuff is ALL gone. Still have the smog pump, engine brackets(drivers side still has PS pump on it) ALL the front suspension parts but the spindles, all the front brake parts(will eventually have a good booster and M/C too) e-brake cables, factory RS grille(went with a z28 grille) single fan setup, blah,blah. I have a PILE of stuff that needs to go away still before I take it all to the scrapyard!! lol
