iroc hood with louvers, all work done to it, just needs primer hatch, no dents 3 pc. wing with 3rd brake light left fender (fixable) right fender, fixable dent, small rust free dent free right fender 1/4 panel extenders rear bumper front facia, one crack fiberglass headlight housing, runs along whole front end bumper re-enforcment rear hitch, for towing rear bumper re-enforcement driver door, with side skirt on door, all electric passenger door, with side skirt on door, all electric 2 sets of r s rims, one grey paint, on polished aluminum all interior panels electric draw down for hatch a arms front springs spindles front sway bar front calipars are still good 10 bolt rear end, no cover stock traction bars new 225/45/17 tires for sale, whole set if you need anything p m me

how much for hood and will u ship to Tx 77080 also do u have pictures

all hoods sold
rust free dent free right fender sold
headlight housing sold
front facia sold
front bumper re-enforcement sold

Have any headlight motors or hood/hatch lift shocks? lol.

no, sorry, i dont have pontiac parts, i do want a pontiac tho, lol

I would really like the electric hatch pull down if it still for sale how much

What color is the interior

interior is gone, waiting on pick up

Hood and Hatch lift shocks work the same on maros and birds. I took the ones on my hatch (that don't fully work) off of an 86 camaro.

i meant that i didnt have pontiac parts (headlight motor) and i have no good shocks, i just have junk ones

I'm looking for a 10 bolt posi, either 3.23 or 3.42 would be nice... would this be a complete rear, ready to bolt up to the car? I have an 86 T/A... & would need shipped to Tucson, 85716... let me know, Thanks!

i do have one, 10 bolt possi, i dont know the gear, i have to check, i was asking 100 for the complete rear, ready to install, short of the rearend cover, i dont have that, its painted, and set to go, just add brakes, i can ship if you need to, anywhere, p m me if your interested, and ill run the numbers, and let you know the gears

Just look on the edge of the ring gear for two numbers divded by a ":" or a "X". Then simply divide the larger number by the smaller one. IE- If you see two numbers like "41 X 17" or "41 : 17" then that would indicate 2.41 GR, etc, etc.

87Camero... would you please look for part numbers? I'm interested... thanks!

i know there is a number on the rear end itself, that if you look it up, it tells you the ring gear and that, but also, suh_wheat_86305, what part numbers are you talkin bout??

parts still avail. rear iroc bumper in great shape still up for grabs
chevy 350 non-center bolt oem valve covers, restoration part, re-pop
rear tail light harness
plastics that go around door handles on inside, mint, pair black
hard top headliner, fixable
passenger door avail. drivers awaiting shipping
passenger fender with small dent still avail
all steel rod braces for iroc (under hood)
iroc fog lights, glass is broke, good for bracket
berlinetta bumper and grille
rear hitch for camaro or firebird
sending unit sold
steering box
k member if anyone interested
pair of good iroc front springs
control arms, pair
stock panhard bar
stock torque arm, non iroc (irocs have cutouts for weight i guess)
rear hatch, no center light in glass
good 3 pc. wing
spindles if useful to anyone
brake pedal
good booster and master
rear disc perporitoning valve
quarter panel extenders, pair
2 auto shifters and 1 stock cable
86 2.8 L berlinetta ecm new in box, but kinda old, not used tho
auto shift plate

more parts, too many to list, p m me if interested in any parts, and for prices, all parts are MUST SELL, no honest offers refused. thanks you

r s side skirts are still up for grabs now

I am looking that metal tube for heater water hose for 86 Iroc thanks

i dont know what one your talking about, do you have a pic of it or know what its from and too, this car has alot of those parts on it

yes I have a GM drawing my email is brioneschevybelair@yahoo.com thanks

Is the rear sold?

not its not, its not and iroc rear, its got drums, but i dont know the rear gear, i know its possi tho

i now have a starter, i used the wrong flywheel, lol, but it works, lifetime from autozone, i dont know the warranty phone number, it was on the car, and changed owners from shop to shop getting the body fixed, not really used, in good shape, works of course, 153 tooth, ready to ship, 50 plus s&h. . its a duralast gold. and the cheapest i could find is 75. im guessing that shipping cant be more than 15 to the usa, but ill make sure

bump
lots of stuff avail.
ill be stripping down the car for scrap, so let me know any specifics, ill keep some parts but only the commonly needed ones, if you need springs, shock mounts, sway bars, or something on it that aint easy to take off, let me know soon!!!

if the rear end is still avail. how much shipped to 53950? gear ratios dont matter just want that posi lol

i am asking 100 for the rear, with both control arms, no rear cover tho, if you consider it sold, ill take it out, and take it in to check ship quote, it cant be more than 75 bucks, idk y. p m me and let me know. i just want it sold cuz taking it out is a pain. i see also that your in wisconsin. let me know if you just want me to deliver it to ya. just gas and save some time for both of us, so i dont have to box it, and you dont have to wait. im in northern illinois, so let me know. also if you have one, im willing to trade for a good 2 or more inch cowl hood for camaro. p m me

sorry, i reposted under my other 3rd gen account, but that was me, you have a pm

bump, parts still avail.

i havnt got a reply back on the shipping cost for that rear end, ur p.m must not have gone thru

im goin to be stripping the car down this week is my plan, but as far as i think, its cheaper to drive or meet than to ship, but ill get it in there as soon as i get it off and get the quote

alright sounds good to me

What do you want for the rear disk proportioning valve shipped to 67204 ?

its a rear drum valve, this car use to have to brakes, and i put it on there

Still got them front springs?

yes i do, p m me for info

plastics that go around door handles on inside, mint, pair black??

do you have the door handles also?

i have the plastics, pair, black mint, 30 shipped

do ya still have the spindles, and if so how much boss??

How much for the front and rear sway bar and what size are they?
Also do you have the wonder bar and if so how much for that.

Shipping to 33825.

i dont have spindles, wonder bars or sway bars, i sold my 87 iroc and all the spare parts are goin with that, and im in the process of fixing my 92 rs and selling that, if anyones interested in buying a camaro, shoot me a pm