You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
350 +.060 flattop motor for sale. Assembled with a couple thousand miles on it. Block ID 14010207. 4-bolt mains. No heads. Forged crank. ARP head bolts. Has Edelbrock Performer RPM cam installed. Very slight surface rust in a couple cylinders from sitting in the garage. Most of it cleans up with you finger. Comes together with the waterpump,balancer,pulleys,brackets,flexplate. No starter. Made 415hp with small runner Dart's on it and a 750 carb. $500obo and u pick up.
Edelbrock Performer RPM manifold. 4 Center bolt holes elongated to accomodate '87up center bolt heads. Nice shape. Used 1 month. Tested on my '87 TPI motor and ran great with a 750carb. $100 shipped for free within the U.S.
Valve springs, 16. Single with damper and steel retainers. 1.52" O.D. good for upto .520" lift. Used 1 month. $40 and shipped for Free within the U.S.
Roller Rockers. Summit # G6905. 1.5 ratio. Includes posi locks. Used 1 month. $125 and shipped for Free within the U.S.
Used stock heads. Center bolts. '87 TPI. Ran great. Can used freshened. Burned a little oil upon startup. $40 and $15 to ship within the U.S.
Used stock heads. 462624 . Originally off the block listed above. 76cc with the 1.94 valves. Ran good but need rebuilt. $30 and $15 to ship.
350 +.060 flattop motor for sale. Assembled with a couple thousand miles on it. Block ID 14010207. 4-bolt mains. No heads. Forged crank. ARP head bolts. Has Edelbrock Performer RPM cam installed. Very slight surface rust in a couple cylinders from sitting in the garage. Most of it cleans up with you finger. Comes together with the waterpump,balancer,pulleys,brackets,flexplate. No starter. Made 415hp with small runner Dart's on it and a 750 carb. $500obo and u pick up.
Edelbrock Performer RPM manifold. 4 Center bolt holes elongated to accomodate '87up center bolt heads. Nice shape. Used 1 month. Tested on my '87 TPI motor and ran great with a 750carb. $100 shipped for free within the U.S.
Valve springs, 16. Single with damper and steel retainers. 1.52" O.D. good for upto .520" lift. Used 1 month. $40 and shipped for Free within the U.S.
Roller Rockers. Summit # G6905. 1.5 ratio. Includes posi locks. Used 1 month. $125 and shipped for Free within the U.S.
Used stock heads. Center bolts. '87 TPI. Ran great. Can used freshened. Burned a little oil upon startup. $40 and $15 to ship within the U.S.
Used stock heads. 462624 . Originally off the block listed above. 76cc with the 1.94 valves. Ran good but need rebuilt. $30 and $15 to ship.
Call for questions. Chris 330-204-4199. Thanks.
What casting numbers are the 87 TPI heads? Just so you know its going to cost a bit more than $15 to ship a pair of heads. You may want to fix that.
I am out of state until Friday, but I will get you the casting numbers by the weekend. I can ship cheaper or for FREE depending on the size/weight of the item because I have an account with FedEx and DHL. Thanks.
